Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
8GB DDR3 1600 ECC registered DIMM with CL11 latency and 1.5V operation for Dell 370-AAVV servers
This 8 GB module runs at DDR3 1600 (PC3-12800) with CL11 latency and 1.50 V standard voltage. It is a 1Rx4 registered ECC DIMM built with major-brand chips for Dell 370-AAVV server and workstation platforms. The 240-pin form factor fits compatible DDR3 slots in enterprise systems. Buyers who need a different capacity, speed, or unbuffered memory should look elsewhere.
Operating at the standard 1.50 V DDR3 voltage keeps power draw within normal limits for registered server memory. The module produces no audible noise because it has no moving parts. Heat output is typical for a single 8 GB DDR3 RDIMM under everyday workloads. Systems without adequate airflow for populated DIMM slots may run warmer.
Quality-assurance testing validates dependable performance during extended server and workstation sessions. Registered buffering and ECC correction maintain data integrity when the module handles continuous multi-threaded workloads. The major-brand chipset supports stable operation over long periods without throttling. Workloads that exceed the 8 GB capacity of a single module will require additional compatible DIMMs.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR3 1600 (PC3 12800) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL11 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx4 |
| Power | |
| Rated voltage | 1.5 V |
Power down, open the chassis, align the notch on the 240-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that the 8GB module registers at 1600MHz with ECC active.
No routine maintenance is required; the module either runs reliably for the system's life or fails outright, at which point you replace it with another DDR3 1600 ECC RDIMM of matching rank and voltage.
The 1600MHz DDR3 bus bandwidth and CL11 latency ceiling become the bottleneck before the 1.50V thermal envelope, capping sustained throughput on memory-intensive server tasks.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?