Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
8GB DDR3 1600 ECC registered DIMM with CL11 latency and 1.5V operation for HP 733020-581 servers
This 8GB DDR3 1600 ECC RDIMM module is built for HP server and workstation platforms that require registered memory with error correction. It suits administrators expanding capacity in compatible systems using the 733020-581 part number.
The registered buffer and ECC function reduce electrical load on the memory controller and correct single-bit errors, which helps maintain data integrity under sustained workloads. The 1Rx4 organisation and 1.5V operation match the original specification for supported HP platforms.
The 240-pin DIMM fits standard DDR3 server slots; alignment is keyed so the module seats in one orientation. Issues usually arise when mixing registered and unbuffered DIMMs or when the system BIOS does not recognise the 1Rx4 density, so verify the qualified vendor list before adding this stick.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | Compatible Replacement for HP |
| Model name | 733020-581 |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR3 1600 (PC3 12800) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL11 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx4 |
| Power | |
| Rated voltage | 1.5 V |
No firmware updates or scheduled maintenance are needed; the module is a validated replacement for HP 733020-581 and runs at standard 1.5 V DDR3 voltage.
The 1.50 V DDR3 standard voltage and CL11 timing define the power envelope; sustained loads stay within the JEDEC DDR3 spec for registered DIMMs.
As a standard-voltage DDR3 registered DIMM it draws nominal power, so additional heat and acoustic impact are minimal in a properly cooled chassis.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?