Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
8GB DDR3 1600 ECC UDIMM 2Rx8 server memory module with Micron chipset, CL11 latency and 1.5V operation
This 8GB DDR3 module operates at 1600MHz with CL11 latency and 1.5V standard voltage. It uses Micron chipset and features a 2Rx8 rank configuration with ECC error correction. The unbuffered DIMM suits server and workstation systems requiring registered memory alternatives.
The DDR3 interface caps transfer rates at PC3-12800 bandwidth with 1.5V operation only. Unbuffered ECC modules cannot function in platforms demanding registered or load-reduced DIMMs. Maximum density per slot is constrained by the DDR3 standard and chipset addressing limits.
The single specification that decides fit is the 2Rx8 ECC unbuffered organisation on a 240-pin DDR3 DIMM. Systems needing registered, fully-buffered, or non-ECC modules will not accept this part. Verify the motherboard qualified-vendor list for this exact rank and ECC type before purchase.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | Compatible Replacement for Micron |
| Model name | MT18JSF1G72AZ-1G6E1ZE, MT18JSF1G72AZ-1G6E1ZF |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR3 1600 (PC3 12800) |
| Processor | |
| Chipset | Micron Chipset |
| Memory | |
| CAS latency | CL11 |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.5 V |
This listing is a single 8GB module in a 2Rx8 organisation. Add one module per available DIMM slot to reach the total capacity your server board supports.
The module runs at 1600 MT/s with CL11 latency at 1.50 V, delivering DDR3-1600 speeds when the memory controller is configured for that frequency.
The 240-pin DDR3 DIMM fits standard DDR3 slots and operates at up to 1600 MT/s; the board's memory controller and qualified-vendor list determine the maximum supported speed.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?