Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
8GB DDR3 1866MHz ECC RDIMM 1Rx4 CL13 1.5V replacement for Kingston KTD-PE318/8G, KVR18R13S4/8, KVR18R13S4K3/24
This A-Tech module delivers 8GB of DDR3 1866MHz (PC3-14900) registered ECC memory for server and workstation systems. It operates at standard 1.5V with CL13 latency and uses a 1Rx4 organisation on a 240-pin DIMM form factor. Major brand chips ensure dependable performance for compatible platforms.
This memory fits systems that require DDR3 1866MHz registered ECC RDIMMs with a 1Rx4 configuration. It replaces Kingston KVR18R13S4/8, KTD-PE318/8G and KVR18R13S4K3/24 part numbers. Builders needing unbuffered non-ECC UDIMMs, different speeds, voltages or pin counts should verify their platform specifications before ordering.
The module is a registered ECC RDIMM built with a single-rank 1Rx4 layout, a requirement for many server motherboards that cannot accept unbuffered or dual-rank alternatives. Confirm your system supports registered ECC DDR3 DIMMs at 1866MHz and 1.5V to ensure compatibility.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR3 1866 (PC3 14900) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL13 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx4 |
| Power | |
| Rated voltage | 1.5 V |
This module operates at DDR3 1866 MHz, which corresponds to the PC3-14900 standard rating.
It fits a standard DDR3 DIMM socket with 240 pins; the registered design also needs a server or workstation motherboard that supports registered memory.
Power down the system, open the chassis, align the module notch with the slot key, press firmly until both retention clips click, then verify the BIOS recognises the full 8 GB capacity.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?