Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
8GB DDR3L 1066MHz ECC registered server memory module with 4Rx8 organisation and 1.35V operation
This is an 8GB DDR3L registered DIMM built for server and workstation platforms that require error-correcting memory. The module runs at 1066MHz with a CAS latency of CL3 and operates at 1.35V low voltage. It uses a 4Rx8 organisation on a 240-pin interface.
It suits administrators upgrading or repairing systems qualified for the Micron MT36KSF1G72PDZ-1G1M1 part number. Builders needing unbuffered UDIMMs, higher frequencies, larger single-module capacities, or non-ECC memory should look elsewhere.
Registered buffering and ECC correction maintain data integrity during continuous multi-threaded workloads. The low-voltage design reduces power draw and heat output when the module is populated across multiple slots for extended periods.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | Compatible Replacement for Micron |
| Model name | MT36KSF1G72PDZ-1G1M1 |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR3L 1066 (PC3L 8500) |
| Processor | |
| Chipset | Micron Chipset |
| Memory | |
| CAS latency | CL3 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 4Rx8 |
| Power | |
| Rated voltage | 1.35 V |
Yes — this is a 240-pin DDR3L registered DIMM that runs at 1.35V, so the board must accept DDR3L RDIMMs at that voltage and pin count.
No — registered ECC RDIMMs cannot be mixed with unbuffered non-ECC memory; the memory controller requires all slots to use the same registered ECC type.
Check the BIOS memory information or use a tool like dmidecode to verify the speed shows 1066MHz, the type is DDR3L, and ECC status reads enabled.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?