Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
8GB DDR3L 1333 ECC UDIMM module with CL9 latency, 1.35V operation and 2Rx8 organisation for Micron MT18KSF1G72AZ-1G4 servers
This 8 GB DDR3L module runs at 1333 MHz with CL9 latency and 1.35 V operation. It is built as an unbuffered ECC UDIMM using a 2Rx8 organisation and major-brand chips. The 240-pin DIMM targets server and workstation systems that require error-correcting memory.
The single specification that decides fit is the PC3L-10600 2Rx8 unbuffered ECC profile. Your motherboard must explicitly support DDR3L 1333 ECC UDIMMs with this rank and voltage. Registered or non-ECC modules will not work in its place, nor will standard 1.5 V DDR3 at the same speed.
Align the notch on the 240-pin DIMM with the slot key, press firmly until the retention clips click, and verify the module seats evenly. The most common issue is inserting a 1.5 V DDR3 stick or a registered DIMM by mistake, which prevents the system from posting. Always confirm the platform supports unbuffered ECC before ordering.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR3L 1333 (PC3L 10600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.35 V |
The module runs at 1333MT/s, giving a peak bandwidth of 10600MB/s per channel.
ECC UDIMM adds single-bit error correction without a register, so the memory controller drives each DIMM directly and the platform must support unbuffered ECC.
It uses the standard 240-pin DDR3 DIMM form factor; the key notch matches DDR3L 1.35V slots and the module height follows the UDIMM profile.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?