Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
An 8 GB DDR3L 1600 ECC registered DIMM with 1.35 V low-voltage operation for server upgrades
This 8GB registered ECC module runs at DDR3L 1600 with a CL11 latency and 1.35V operation. It uses a 1Rx4 organisation and major-brand chips on a 240-pin DIMM. The module targets administrators upgrading or repairing compatible server and workstation platforms that require registered ECC memory.
The DDR3L 1600 standard tops out at 12800 MB/s theoretical bandwidth per module. Registered buffering adds one clock cycle of latency versus unbuffered DIMMs, and the 1.35V low-voltage spec means the module will not operate at 1.5V DDR3 voltages. ECC function requires a chipset and BIOS that actively support error correction; without that support the extra parity bits are ignored.
Installation is a matter of aligning the 240-pin key and pressing the module into the slot until the retention clips engage. The most common issue is purchasing registered ECC memory for a platform that only accepts unbuffered non-ECC DIMMs, which prevents the system from posting. Verifying the motherboard qualified-vendor list against the listed Kingston part numbers avoids that mismatch.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR3L 1600 (PC3L 12800) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL11 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx4 |
| Power | |
| Rated voltage | 1.35 V |
This listing is for a single 8GB module; the 32GB reference (KTD-PE316SK4/32G) is a four-module kit. Buy one module per slot you want to populate.
DDR3L 1600 runs at 1600 MHz with CL11 latency, so each channel moves data at the PC3L-12800 rate; actual throughput depends on your platform's memory controller and channel count.
The module is a 240-pin DDR3L RDIMM with ECC and 1.35 V operation; it fits DDR3L RDIMM slots that support registered ECC — verify your system's qualified-vendor list before installing.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?