Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
8GB DDR4 2400 ECC RDIMM server memory with registered design for HP systems
This 8 GB registered module runs at DDR4 2400 with CL17 latency and 1.20 V operation. It is built for HP ProLiant and compatible server platforms that require ECC error correction and registered signal buffering. The single-rank 1Rx8 organisation suits configurations that populate many DIMM slots per channel. Administrators expanding memory in supported systems will find a direct drop-in part.
ECC circuitry detects and corrects single-bit errors during continuous operation, preventing silent data corruption in long-running workloads. Registered signalling reduces electrical load on the memory controller, keeping timing margins stable when all 288-pin slots are populated. The module maintains its rated 2400 MT/s throughput under extended duty cycles typical of virtualization hosts and database servers.
This part replaces any of the listed HP part numbers such as 805347-B21, 809080-591, 819410-001, 851353-B21, 853287-091 or 854592-B21. The jump is worthwhile when the platform supports DDR4 2400 registered ECC and the current configuration has free DIMM slots or lower-capacity modules. It does not suit systems that require unbuffered UDIMMs, higher speeds or capacities beyond 8 GB per slot.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR4 2400 (PC4 19200) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL17 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx8 |
| Power | |
| Rated voltage | 1.2 V |
The module operates at the standard DDR4 voltage of 1.20V, which is the baseline for DDR4 power consumption; actual draw depends on the platform's memory controller and workload.
A server or workstation motherboard with DDR4 RDIMM slots, registered ECC support in the chipset or CPU, and a memory controller qualified for DDR4 2400 operation.
Mixing is possible only if the platform supports mixed-rank and mixed-speed populations; the system will run all modules at the lowest common speed and may require specific slot placement per the vendor's memory population rules.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?