Crucial CT32G56C46S5 32GB DDR5 5600 CL46 262-pin SO-DIMM laptop RAM
- 32 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
8GB DDR4 2400MHz CL17 SODIMM laptop memory module with 260-pin form factor and 1.2V operation
This 8GB DDR4 2400MHz CL17 SODIMM module is built as a direct replacement for HP part 854916-001. It suits laptop, notebook and all-in-one owners who need a straightforward capacity increase without changing voltage or form factor. The unbuffered, non-ECC design matches standard consumer platforms that accept 260-pin DDR4 memory. Installation is a simple slot-in upgrade for compatible systems.
Swapping the original HP 854916-001 module for this unit makes sense when your workload exceeds the factory-fitted amount or when a failed stick needs a like-for-like substitute. The 2400MHz PC4-19200 rating and 1.20V operation keep the electrical profile identical to the OEM part, so the jump is worth it whenever the board already supports DDR4 2400 and an empty or occupied slot can take an 8GB 1Rx8 module.
Before ordering, confirm that your laptop or all-in-one uses 260-pin DDR4 SO-DIMM sockets and that the BIOS or chipset allows 2400MHz operation at CL17 latency. Check how many slots are populated and whether the system accepts an 8GB 1Rx8 density per slot. The module has no heat spreader, so ensure the chassis clearance around the memory bay is adequate for a bare PCB.
Measured against everything we stock in Laptop RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | Compatible Replacement for HP |
| Model name | 854916-001 |
| Total capacity | 8 GB |
| Product type | 260-Pin DDR4 SO-DIMM |
| Performance | |
| Rated speed | DDR4 2400 (PC4 19200) |
| Memory | |
| CAS latency | CL17 |
| ECC support | No |
| Buffer type | Unbuffered |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Recommended for | Compatible Replacement for HP 854916-001 |
This module uses the standard 260-pin DDR4 SO-DIMM form factor used by most modern laptops. Verify your system requires DDR4 SO-DIMM memory before purchasing.
Power off the laptop, remove the battery if possible, open the memory compartment, align the notch on the module with the slot key, insert firmly until seated, then press down until the retention clips snap shut.
No routine maintenance is needed. The module is tested for reliability and backed by a lifetime warranty. Replace only if a memory diagnostic tool reports errors or capacity becomes insufficient.
More in Laptop RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?