Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
An 8 GB DDR4 2666 ECC UDIMM module with CL19 latency, 1.20 V operation and a 1Rx8 layout on 288 pins
This 8GB DDR4 2666 ECC UDIMM module is built for server and workstation systems that require error-correcting memory. It operates at 1.20V with a CAS latency of CL19 and uses a single-rank 1Rx8 organisation. The 288-pin DIMM is a direct replacement for several Kingston part numbers.
The module runs at the DDR4 2666 (PC4-21300) data rate, which is the maximum speed supported by this standard. Because it is unbuffered ECC, it cannot be mixed with registered or load-reduced DIMMs in the same system. The memory controller must support ECC UDIMM operation at this frequency for the module to function correctly.
Verify that your motherboard or server platform explicitly supports ECC unbuffered DDR4 DIMMs at 2666MHz. Systems that only accept registered ECC or non-ECC memory will not work with this module. Confirm the maximum supported capacity per slot and the total number of available 288-pin slots in your chassis.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR4 2666 (PC4 21300) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL19 |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Memory rank | 1Rx8 |
| Power | |
| Rated voltage | 1.2 V |
This module is a single-rank 1Rx8 design, which places less electrical load on the memory controller and is often preferred for maximum slot population.
The module runs at DDR4 2666 MHz with CL19 latency, providing 21300 MB/s peak bandwidth for server and workstation workloads.
It uses a standard 288-pin DDR4 DIMM slot with ECC unbuffered signalling; the system must support ECC UDIMM memory for error correction to function.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?