Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
An 8 GB DDR4 2666 MHz ECC RDIMM module with 2Rx8 organisation, CL19 latency and 1.20 V operation for server and workstation systems
This 8GB DDR4 2666MHz ECC Registered DIMM targets administrators expanding memory in compatible servers and workstations. The module uses major-brand chips in a 2Rx8 organisation and runs at the standard 1.20V. It replaces the Micron MTA18ASF1G72PDZ-2G6 part number directly.
The jump is worthwhile when workloads demand error-correcting code protection and registered signalling for platform stability. Systems limited to unbuffered memory or single-rank configurations cannot use this module. Verify the motherboard qualified-vendor list before ordering.
The 288-pin DDR4 RDIMM form factor fits only slots wired for registered operation and DDR4 electricals. Mixing with unbuffered DIMMs or different-speed modules may prevent boot or force reduced frequency. Population rules vary by platform; consult the system manual for supported rank counts per channel.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR4 2666 (PC4 21300) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL19 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.2 V |
Yes, the module uses the 288-pin DDR4 DIMM form factor and registered ECC design required by compatible server and workstation motherboards.
Align the notch with the slot key, press firmly until both retention clips click, then power on so the register and ECC logic train at 1.2 V.
Replace it if the system logs uncorrectable ECC errors, fails memory diagnostics, or no longer posts after verified seating and firmware updates.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?