Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
8GB DDR4 2933MHz ECC UDIMM module with CL21 latency and 1.2V operation for server upgrades
This A-Tech server memory module delivers 8GB of DDR4 capacity at 2933MHz with PC4-23400 bandwidth. It operates at 1.20V standard voltage and features ECC error correction with an unbuffered design. The single-rank 1Rx8 configuration uses major brand chips for reliable operation in compatible systems.
This module suits administrators upgrading or repairing servers and workstations that require DDR4 ECC UDIMM memory at 2933MHz. It is not for builders needing registered or load-reduced DIMMs, systems limited to lower DDR4 speeds, or platforms that only accept non-ECC consumer memory. Buyers who want higher capacities per slot should look at larger modules.
The 288-pin DIMM fits standard DDR4 UDIMM slots in supported server and workstation motherboards. ECC functionality requires a platform that enables error correction in the BIOS or firmware. The 1.20V operation matches standard DDR4 voltage, so no special power configuration is needed. Verify your system's qualified vendor list before installation to ensure compatibility.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR4 2933 (PC4 23400) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL21 |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Memory rank | 1Rx8 |
| Power | |
| Rated voltage | 1.2 V |
The module is a 288-pin DDR4 ECC UDIMM at 1.20V and CL21; it will function in any board that supports DDR4 ECC UDIMMs at 2933MHz or that can down-clock the module to a supported speed.
Mixing capacities and ranks is possible on platforms that support mixed populations; the memory controller will typically run all modules at the lowest common speed and tightest common timings.
Check the BIOS memory information or use an OS tool such as dmidecode, lshw or CPU-Z to verify speed shows 2933MHz, type shows ECC UDIMM and ECC status reports enabled.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?