Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
An 8 GB DDR4 ECC UDIMM running at 3200 MHz with CL22 latency and 1.2 V operation for compatible HP servers
This A-Tech 8GB DDR4 3200MHz ECC UDIMM module is built for server and workstation systems that require error-correcting unbuffered memory. It serves as a compatible replacement for the HP M10476-001 part number.
The module suits administrators upgrading compatible HP servers or workstations that accept 1Rx8 DDR4 ECC UDIMMs at 1.2V. Builders needing registered DIMMs, non-ECC memory, or capacities beyond a single 8GB stick should look elsewhere.
Installation follows the standard 288-pin DIMM procedure: align the notch, press firmly until the retention clips engage, and verify detection in the system BIOS. The most common issue is purchasing the wrong generation or buffer type for the target platform.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | Compatible Replacement for HP |
| Model name | M10476-001 |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR4 3200 (PC4 25600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL22 |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Memory rank | 1Rx8 |
| Power | |
| Rated voltage | 1.2 V |
Yes, the module uses a 288-pin DDR4 DIMM form factor, so the board must provide a matching DDR4 DIMM slot.
The system will run all modules at the speed and timings of the slowest installed kit, so slower DDR4 ECC UDIMMs will work but reduce overall memory frequency.
Check the BIOS memory information or use a tool such as CPU-Z to verify the reported speed is 3200MHz and that ECC is shown as enabled.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?