Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR4 3200 MHz ECC registered server memory with CL22 latency and 2Rx8 dual-rank organisation
This 16GB DDR4 module carries Supermicro certification and is built for servers and workstations that require registered ECC memory. It suits administrators expanding capacity in qualified Supermicro platforms or replacing failed DIMMs with a validated part.
The module uses a registered design that places a register between the DRAM and the memory controller, reducing electrical load on the bus. Its 288-pin RDIMM form factor fits standard DDR4 server slots, and the dual-rank 2Rx8 organisation supports higher densities per channel.
The DIMM runs at PC4-25600 speed with a CAS latency of 22 and operates at the standard 1.20V DDR4 voltage. Systems must support DDR4 3200 registered ECC memory at this latency; platforms limited to lower speeds or unbuffered DIMMs cannot use this module.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SuperMicro |
| Product line | Supermicro Certified |
| Model name | MEM-DR416LD-ER32 |
| Total capacity | 16 GB |
| Performance | |
| Rated speed | DDR4 3200 (PC4 25600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL22 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.2 V |
The module runs at 3200 MHz as PC4-25600 in a 288-pin RDIMM form factor with CL22 latency and 1.20 V operation.
It fits a standard DDR4 288-pin RDIMM slot; the registered design and ECC function only work on platforms that support registered ECC memory.
Power down the server, open the chassis, align the notch with the slot key, press firmly until both retention clips click, then verify in BIOS that ECC and registered mode are active.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?