Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
32 GB DDR4 2933 MHz ECC registered RDIMM, CL21 1.20 V, Supermicro certified with Samsung chips
This A-Tech module is a 32GB DDR4 2933MHz CL21 ECC Registered RDIMM built for Supermicro platforms. It uses Samsung chips and carries the MEM-DR432LC-ER29 qualification for direct compatibility. The single stick adds capacity to servers and workstations that require registered error-correcting memory. Installation is a standard 288-pin DIMM insertion.
The decisive specification is the Registered ECC RDIMM design with 2Rx4 organisation. Systems that accept only unbuffered UDIMMs or non-ECC modules cannot use this stick. Buyers must confirm their motherboard or server documentation lists support for registered ECC DDR4 at 2933MHz before ordering. Voltage is 1.20V, matching the DDR4 standard.
This module suits administrators expanding qualified Supermicro servers or replacing failed sticks in validated configurations. It is not for desktop PCs, laptops or consumer motherboards that lack registered ECC support. Builders needing unbuffered memory, higher speeds or larger single-module capacities should look elsewhere.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SuperMicro |
| Product line | Supermicro Certified |
| Model name | MEM-DR432LC-ER29 |
| Total capacity | 32 GB |
| Performance | |
| Rated speed | DDR4 2933 (PC4 23400) |
| Processor | |
| Chipset | Samsung Chipset |
| Memory | |
| CAS latency | CL21 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.2 V |
The module runs at DDR4 2933 speed, delivering PC4-23400 bandwidth so the memory controller can move data at that rate when the platform supports it.
The 288-pin RDIMM form factor fits registered DIMM slots and the registered buffer lets the memory controller address 2Rx4 ranks reliably at 1.20 V.
It requires a standard DDR4 288-pin RDIMM slot and the module height matches regular server DIMM clearance.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?