Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 32 GB DDR4-3200 ECC registered DIMM built with Micron chips and certified for Supermicro servers
This 32GB DDR4 3200 ECC registered DIMM uses Micron chips and carries Supermicro certification. It targets server and workstation builds that require error-correcting memory for data integrity. The module runs at 1.20V with CL22 latency and a dual-rank 2Rx8 organisation.
Registered buffering and ECC correction keep data paths stable during continuous multi-threaded tasks such as virtualisation, database serving or scientific compute. Dual-rank density allows higher capacity per channel without increasing electrical load on the memory controller.
This module replaces lower-capacity or non-ECC DDR4 RDIMMs in qualified Supermicro platforms. The jump is worthwhile when workloads exceed current memory headroom or when silent data corruption risk must be reduced. Verify the system qualified-vendor list before purchase.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SuperMicro |
| Product line | Supermicro Certified |
| Model name | MEM-DR432MD-ER32 |
| Total capacity | 32 GB |
| Performance | |
| Rated speed | DDR4 3200 (PC4 25600) |
| Processor | |
| Chipset | Micron Chipset |
| Memory | |
| CAS latency | CL22 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.2 V |
The module operates at 1.2 V, the standard DDR4 voltage, which limits heat output during sustained workloads.
Yes, the system needs a DDR4 RDIMM slot that accepts 288-pin registered ECC modules; unbuffered or non-ECC slots will not work.
Mixing speeds forces all DIMMs to run at the lowest common speed and loosest timings, so this CL22 3200 module will down-clock to match slower sticks.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?