Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Supermicro-certified 8 GB DDR3 1333 MHz ECC registered DIMM with dual-rank Hynix chips and 240-pin form factor
This module is built for servers and workstations that require registered ECC memory. It targets system builders and IT professionals who need validated compatibility with Supermicro platforms. The 8GB capacity suits memory upgrades or replacements in multi-slot configurations.
Operating at the standard DDR3 voltage of 1.50V, the module runs within typical server thermal envelopes. Registered buffering adds minimal electrical load to the memory controller. Passive cooling in a chassis with adequate airflow is sufficient for normal operation.
The dual-rank 2Rx4 organisation and CL9 latency at 1333MHz define the module's electrical behaviour. Only systems that support DDR3 registered ECC DIMMs at this speed can use it. Buyers needing unbuffered non-ECC memory or a different DDR generation cannot install this part.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SuperMicro |
| Product line | Supermicro Certified |
| Model name | MEM-DR380L-HL01-ER13 |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR3 1333 (PC3 10600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.5 V |
Power down the server, open the chassis, align the notch on the 240-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that the 8GB module registers at 1333 MHz with ECC active.
No scheduled maintenance is needed; keep air vents clear so the 1.50V modules stay cool, and replace the stick only if system logs report uncorrectable ECC errors or the server fails to POST with the module seated.
The 1333 MHz data rate and CL9 latency set the throughput ceiling, so sustained workloads will hit bandwidth limits before the 1.50V power envelope becomes a constraint.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?