Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
8GB DDR4 2133MHz ECC registered DIMM with CL15 latency and 1.2V operation for Supermicro servers
This 8GB DDR4 2133MHz ECC RDIMM module is built for servers and workstations that require registered memory with error correction. It operates at 1.20V with a CAS latency of 15 and uses a 1Rx4 single-rank Hynix chipset. The 288-pin form factor fits standard DDR4 RDIMM slots in compatible Supermicro platforms.
This module replaces standard unbuffered or non-ECC DIMMs when system stability and data integrity become critical for the workload. The jump is worth it for virtualisation hosts, database servers, or any application where silent data corruption cannot be tolerated. It is not for systems that only accept unbuffered UDIMMs or platforms limited to lower-density ranks.
Installation follows the standard 288-pin RDIMM procedure: align the key notch, press firmly until the retention clips engage, then verify detection in BIOS. What usually goes wrong is mixing registered and unbuffered modules in the same channel or populating slots in an order the motherboard manual does not support. Always confirm the exact MEM-DR480L-HL02-ER21 part number against the vendor qualified-vendor list before seating the module.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SuperMicro |
| Product line | Supermicro Certified |
| Model name | MEM-DR480L-HL02-ER21 |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR4 2133 (PC4 17000) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL15 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx4 |
| Power | |
| Rated voltage | 1.2 V |
Yes, the module uses the 288-pin RDIMM form factor that matches standard DDR4 server memory slots.
Align the notch with the slot key, press firmly until both side clips click shut, then verify the system registers the full 8 GB at 2133 MHz in BIOS.
No firmware updates are required for the memory itself, and the chips have no scheduled replacement interval under normal server operation.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?