Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
8GB DDR3L 1600MHz ECC registered DIMM with Samsung chips, Supermicro certified for server reliability
This A-Tech module is an 8GB DDR3L 1600MHz ECC Registered DIMM validated for Supermicro platforms. It uses Samsung chips and operates at 1.35V low voltage with a CL11 latency. The 240-pin RDIMM form factor fits server and workstation boards that require registered error-correcting memory.
Administrators upgrading compatible Supermicro servers or workstations can install this single-rank module to add capacity. Systems that accept only unbuffered non-ECC DIMMs cannot use this registered stick. Buyers needing higher density per slot or a different voltage should verify their board specifications before ordering.
The decisive attribute is the DDR3L 1600MHz registered ECC interface with 1.35V operation. Only motherboards explicitly supporting DDR3L registered ECC DIMMs will recognise and run this module correctly.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SuperMicro |
| Product line | Supermicro Certified |
| Model name | MEM-DR380L-SL14-ER16 |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR3L 1600 (PC3L 12800) |
| Processor | |
| Chipset | Samsung Chipset |
| Memory | |
| CAS latency | CL11 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx4 |
| Power | |
| Rated voltage | 1.35 V |
The module runs at DDR3L 1600 with CL11 timing, which is the standard latency for this speed grade and does not introduce an additional bottleneck beyond the platform's memory controller limits.
Operating at 1.35V low voltage reduces power draw and heat output compared to standard 1.5V DDR3, and the registered buffer helps maintain signal integrity without adding significant thermal load during all-day operation.
Yes, the system must accept DDR3L 1600 ECC registered 240-pin RDIMMs at 1.35V with single-rank 1Rx4 organisation; verify your board's qualified vendor list for the M393B1G70EB0-YK0 part before installing.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?