Crucial CT32G56C46S5 32GB DDR5 5600 CL46 262-pin SO-DIMM laptop RAM
- 32 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR4 2666 MHz SODIMM module certified for Supermicro systems with CL19 latency
This 16 GB DDR4 2666 MHz SODIMM carries Supermicro certification and uses a Samsung M471A2K43CB1-CTD module. It targets technicians and system builders who need guaranteed compatibility with qualified Supermicro platforms. The 260-pin unbuffered non-ECC design fits standard laptop and compact system slots.
Operating at the standard 1.20 V DDR4 voltage, the module draws minimal power and produces no audible noise. With no heat spreader installed, it relies on system airflow for cooling, which is typical for SODIMM form factors in normal workloads.
The CAS latency is rated at CL19 for the 2666 MT/s data rate, which is the key timing figure that determines whether this module matches your system's memory controller requirements. Verify your platform's supported speed and latency before ordering.
Measured against everything we stock in Laptop RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SuperMicro |
| Product line | Supermicro Certified |
| Model name | MEM-DR416LD-SO26 |
| Total capacity | 16 GB |
| Product type | 260-Pin DDR4 SO-DIMM |
| Performance | |
| Rated speed | DDR4 2666 (PC4 21300) |
| Memory | |
| CAS latency | CL19 |
| ECC support | No |
| Buffer type | Unbuffered |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Recommended for | Compatible Supermicro Systems |
Power off the laptop and disconnect the battery if accessible. Open the memory compartment, align the notch on the module with the slot key, insert at an angle, then press down firmly until both retention clips click. The step most people miss is pressing down hard enough to engage both clips; a loose module causes boot failures.
No scheduled maintenance is required for this non-ECC unbuffered SODIMM. It has no heat spreader, so keep the laptop vents clean to avoid thermal throttling. Replacement is only needed if a memory test reports errors or you upgrade capacity beyond the single 16GB stick.
The primary limit is the DDR4 2666 MHz bandwidth ceiling at CL19 latency. Under prolonged load the module runs at standard 1.20V without a heat spreader, so the laptop's cooling capacity becomes the practical bottleneck before the memory itself throttles.
More in Laptop RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?