AddOn AGM731F-AO 1000Base-SX SFP transceiver 850nm 550m LC
A 1-Gigabit SFP transceiver for multimode fibre at 850 nm reaching 550 m with an LC connector
- Product typeTransceiver
- Optical wavelength850 nm
- Supported protocolsTCP/IP
- HighlightsConnector: LC DOM: Non-DOM Form Type: SFP Media: MMF Reach:
- Product dimensions0.3 in × 0.5 in × 2.2 in (H × W × D)
- Product weight0.15 lb (0.07 kg)
- Gigabit fibre link up to 550 m over multimode
- 850 nm wavelength suits short-range SX deployments
- LC duplex connector fits standard SFP cages
- Hot-pluggable SFP form factor enables tool-free swaps
- Lightweight 0.15 lb module reduces chassis load
1000Base-SX SFP transceiver for multimode fibre
The AddOn AGM731F-AO is a small-form-factor transceiver built for 1-gigabit Ethernet over multimode fibre. It uses an 850 nm wavelength and an LC duplex connector to reach 550 metres. The module suits network administrators upgrading Netgear switches or routers that accept standard SFP ports.
Check SFP slot type and fibre patch cords before
Verify that the host device lists SFP rather than SFP+ or another form factor and that it supports 1000Base-SX optics. Ensure the patch panel and jumpers are multimode fibre with LC connectors matched to the 850 nm specification. Confirm the link budget covers the planned run length.
Steady 1-gigabit throughput across the 550-metre
The transceiver maintains line-rate 1000 Mbps over the full 550 metre multimode distance without throttling. Operating temperature range and non-DOM design keep performance consistent during continuous traffic loads. Low power draw reduces thermal load inside dense switch chassis.
How it compares
Measured against everything we stock in SFP & SFP+ Transceiver Modules, at today’s prices. Recalculated every night.
- Price $54.99
- Cheaper than about 70% of the 1,470 comparable items (median $138.49).
New to this? Buying networking gear with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | AddOn - Network Upgrades |
| Model name | AGM731F-AO |
| Product type | Transceiver |
| Connectivity | |
| Optical wavelength | 850 nm |
| Supported protocols | TCP/IP |
| Size & build | |
| Product dimensions | 0.3 in × 0.5 in × 2.2 in (H × W × D) |
| Product weight | 0.15 lb (0.07 kg) |
| Shipping weight | 0.02 kg |
| Package size | 109 × 43 × 23 mm |
Questions about this item
Does the AGM731F-AO come with any cables or patch leads, or do I need to buy LC duplex fibre separately?
The transceiver ships alone; you must supply your own LC duplex multimode patch cable to connect it.
My switch only lists 1000Base-SX — is this the correct version or do I need a different wavelength?
Yes — the module operates at 850 nm and is built for 1000Base-SX links over multimode fibre.
The spec says 550 m reach; will that distance hold on standard OM2 multimode in my building?
The 550 m figure is the rated maximum on OM2 multimode fibre; shorter runs on OM1 or OM3 will also work within that limit.
More in SFP & SFP+ Transceiver Modules
Similar items
HPE JD089B Gigabit Ethernet SFP Transceiver 1000Base-T RJ-45
- Transceiver
- HCRP, SPP
STARTECH MASFP10GBLR SFP+ transceiver 10GBASE-LR 10km 1310nm LC
- Transceiver
- IEEE 802.3ae 10 Gbi…
AddOn J4858C-AO SFP transceiver 1000Base-SX 850nm 550m LC
- Transceiver
- TCP/IP
STARTECH MCMGBSCSM10 SFP transceiver 1000BASE-LX 10km
- Converter
- IEEE 802.3u 100BASE…
AddOn EX-SFP-1GE-SX-AO 1000Base-SX SFP transceiver 850 nm 550 m LC
- 1 x LC 1000Base-SX
- 850 nm





