AddOn E1MG-SX-OM-AO SFP transceiver 1000Base-SX 850nm 550m LC DOM
A 1000Base-SX SFP transceiver for multi-mode fibre, 850 nm wavelength, 550 m reach, LC connector and DOM monitoring, compatible with Brocade E1MG-SX-OM
- Form factorSFP
- Brand compatibilityBrocade® (Formerly)
- Product typeTransceiver
- HighlightsCompatible OEM: Brocade® (Formerly) Compatible With OEM Part
- 1000 Mbps data rate over 550 m multimode fibre
- 850 nm wavelength suits short-range network links
- LC duplex connector for standard patch-panel fit
- SFP form factor enables hot-swap module changes
- Digital optical monitoring reports real-time link health
AddOn SFP Transceiver 1000Base-SX 550m
This AddOn E1MG-SX-OM-AO is a small form-factor pluggable transceiver built for 1-Gigabit Ethernet over multi-mode fibre. It operates at an 850nm wavelength and reaches 550 metres using LC connectors. Digital optical monitoring is included so link health can be tracked in real time. The module is new and coded for Brocade® (Formerly) equipment.
Network links needing 1-Gigabit multi-mode fibre
This transceiver suits engineers extending Brocade® (Formerly) switches or routers across campus or data-centre rows where 550 metres of multi-mode fibre is sufficient. It is not for single-mode fibre runs, nor for speeds beyond 1-Gigabit. Environments outside the 0 to 70°C range also fall outside its rating.
Reach 550 metres over multi-mode fibre
The 550-metre reach on 850nm multi-mode fibre is the specification that decides whether this module fits the link. If the required span exceeds that distance, or if the cabling plant is single-mode, a different transceiver type must be chosen.
How it compares
Measured against everything we stock in SFP & SFP+ Transceiver Modules, at today’s prices. Recalculated every night.
- Price $34.99
- Cheaper than about 83% of the 1,470 comparable items (median $138.49).
New to this? Buying networking gear with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | AddOn |
| Part number | E1MG-SX-OM-AO |
| Product type | Transceiver |
| Size & build | |
| Form factor | SFP |
| Shipping weight | 0.16 kg |
| Package size | 121 × 70 × 30 mm |
| Compatibility | |
| Brand compatibility | Brocade® (Formerly) |
Questions about this item
Will this 1000Base-SX SFP work in a legacy Brocade switch that only accepts the original E1MG-SX-OM module?
Yes, the E1MG-SX-OM-AO is built to the same SFP form factor, 850nm wavelength and 550m reach as the Brocade E1MG-SX-OM, so it fits and operates in the same legacy ports.
How can I confirm the transceiver is functioning correctly once it is installed?
The module supports Digital Optical Monitoring; after insertion you can read real-time temperature, voltage, bias current and optical power levels through the switch management interface to verify it is operating within the 0 to 70C range.
Does the package include the LC patch cable or must I order multi-mode fibre separately?
Only the SFP transceiver is supplied; you will need to provide your own LC-terminated multi-mode fibre patch cord to complete the 550m link.
More in SFP & SFP+ Transceiver Modules
Similar items
STARTECH LX-ST SFP transceiver 1000Base-LX 10 km 1310nm
- 1000Base-LX
- SFP Transceiver Mod…
HPE JD089B Gigabit Ethernet SFP Transceiver 1000Base-T RJ-45
- Transceiver
- HCRP, SPP
STARTECH SFP1GLXEMCST SFP transceiver 1 Gbps 1310 nm 10 km LC
- LC
- Transceiver
STARTECH MASFP10GBLR SFP+ transceiver 10GBASE-LR 10km 1310nm LC
- Transceiver
- IEEE 802.3ae 10 Gbi…
SFP-10G-RJ45-A3R SFP transceiver 10G/5G/2.5G/1G RJ-45
- Silver
- A1: 10G/5G/2.5G/1G…





