AddOn QFX-SFP-1GE-T-AO SFP transceiver 1000Base-TX RJ-45 100m
A copper SFP transceiver delivering 1 Gbps over RJ-45 cabling up to 100 m, built to match Juniper QFX-SFP-1GE-T specifications
- Product typeTransceiver
- Network cablingCopper
- Transfer speed1 Gbit/s
- HighlightsCompatible OEM: Juniper Networks Compatible With OEM Part Nu
- Juniper QFX-SFP-1GE-T compatible for direct replacement
- 1 Gbps copper link over standard RJ-45 cabling
- SFP form factor fits existing switch ports
- 100 m reach covers typical rack-to-rack runs
- TAA compliant for regulated procurement requirements
Juniper-compatible SFP transceiver for 1 Gbps
This AddOn QFX-SFP-1GE-T-AO module delivers a 1000Base-TX connection over standard RJ-45 copper cabling. It is built to plug into SFP slots on Juniper Networks equipment that accepts the QFX-SFP-1GE-T part number. The transceiver suits network administrators who need a drop-in copper interface for 1 Gbps links up to 100 metres.
Steady throughput at 1 Gbps over the full 100
The module maintains its rated 1 Gbps transfer rate across the entire 100 metre copper distance without stepping down to a lower speed. Because it uses a TX transceiver type on copper media, latency and error rate stay consistent during sustained traffic loads rather than only in short bursts. Non-DOM operation means no digital optical monitoring overhead is present.
Verify SFP slot acceptance
Confirm that your Juniper device lists the QFX-SFP-1GE-T part number as a supported module so the SFP slot will recognise this compatible unit. Ensure the link partner also runs at 1000Base-TX with auto-negotiation enabled and that Category 5 or better copper patch cables are installed end to end. Buyers who need longer reach or fibre media cannot use this copper transceiver.
How it compares
Measured against everything we stock in SFP & SFP+ Transceiver Modules, at today’s prices. Recalculated every night.
- Price $48.99
- Cheaper than about 74% of the 1,470 comparable items (median $138.49).
New to this? Buying networking gear with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | AddOn - Network Upgrades |
| Model name | QFX-SFP-1GE-T-AO |
| Product type | Transceiver |
| Performance | |
| Transfer speed | 1 Gbit/s |
| Connectivity | |
| Network cabling | Copper |
| Size & build | |
| Shipping weight | 0.16 kg |
| Package size | 121 × 70 × 30 mm |
Questions about this item
How much heat and power does the 1 Gbps SFP transceiver draw when running continuously?
The module is a passive copper transceiver with no active cooling, so heat output is minimal and power draw is limited to the host port's SFP supply.
What must my switch already provide for this RJ-45 module to operate?
Your switch needs an open SFP cage that accepts 1000Base-TX copper transceivers and supplies the standard SFP power budget.
Will this 100m copper transceiver link reliably with older 100 Mbps ports I still use?
The transceiver is fixed at 1 Gbps and does not auto-negotiate down to 100 Mbps, so it will not establish a link with legacy Fast Ethernet ports.
More in SFP & SFP+ Transceiver Modules
Similar items
AddOn MGBSX1-AO SFP transceiver 1000Base-SX 850nm 550m LC
- 1 x LC 1000Base-SX…
- TCP/IP
HPE JD089B Gigabit Ethernet SFP Transceiver 1000Base-T RJ-45
- Transceiver
- HCRP, SPP
Array J4859C-AR SFP transceiver 1310nm SMF
- MSA Compliant, RoHS…
- Single-mode Fiber (…
STARTECH MASFP10GBLR SFP+ transceiver 10GBASE-LR 10km 1310nm LC
- Transceiver
- IEEE 802.3ae 10 Gbi…
STARTECH J8177CST SFP transceiver 1000BASE-T RJ45 100m
- 1 - RJ-45 Female
- Transceiver





