Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
64 GB DDR4 ECC registered module running at 2666 MHz with CL17 latency and 1.20 V operation
This 64 GB DDR4 2666 registered ECC module is built for servers and workstations that need large, error-correcting memory capacity. The 288-pin DIMM runs at 1.20 V with a CL17 latency profile. It targets administrators scaling up multi-socket platforms where data integrity matters.
Replacing lower-capacity or non-ECC sticks with this registered module adds 64 GB per slot and enables error correction across the memory bus. The jump is worth it when workloads exceed current physical memory or when uncorrected errors risk silent data corruption in critical applications.
The module installs in standard 288-pin DDR4 registered memory channels that support 1.20 V operation. It frees DIMM slots by delivering 64 GB in a single rank-dense package, leaving room for future expansion within the platform's maximum slot count.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | AddOn - Network Upgrades |
| Model name | UCS-ML-X64G4RS-H-AM |
| Total capacity | 64 GB |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 2666 (PC4 21300) |
| Memory | |
| CAS latency | CL17 |
| ECC support | Yes |
| Buffer type | Registered |
| Power | |
| Rated voltage | 1.2 V |
| Size & build | |
| Shipping weight | 0.23 kg |
| Package size | 178 × 51 × 13 mm |
The module uses the standard 288-pin DDR4 form factor, so it fits any server board with DDR4 registered DIMM slots.
Power down the server, open the chassis, align the notch on the 288-pin edge connector with the slot key, press firmly until both retention clips click, then verify the full 64 GB appears in BIOS.
Replace the kit if memory diagnostics report uncorrectable ECC errors, if the system fails to POST at the rated 2666 MT/s speed, or when a platform upgrade requires a different memory generation.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?