aibileec RGB Controller 10×6Pin 2×4Pin 12V 5A internal power cable
Controls up to 10 RGB fans and 2 light bars with 368 colour modes, 3 music modes and motherboard sync via 433.92 MHz remote
- Product colorBlack
- Controls 10 fans and 2 light bars via 6-pin and 4-pin ports
- 368 colour modes plus 3 music-reactive presets
- RF remote operates at 433.92 MHz frequency
- Adjustable fan speed with 26.4 dBA low-noise rating
- 12 V 0.28 A power input with marked polarity protection
RGB Controller for 10 Fans and 2 Light Bars
This internal power cable kit centres on a 12 V controller that drives up to ten 6-pin RGB fans and two 4-pin light bars. It ships with an RF remote operating at 433.92 MHz and offers 368 pre-programmed colour modes plus three music-reactive presets. Motherboard RGB synchronisation is supported for unified lighting across the build.
Builders who want centralised fan and light control
The unit suits enthusiasts who prefer a single hub to manage fan speed, brightness and colour without software. It is not suited for systems that rely exclusively on 5 V addressable headers or for users who need per-LED addressable effects, because the controller only drives standard 12 V RGB devices.
Ten fan channels and two light-bar channels
Each fan draws 0.28 A at 12 V, so the 5 A controller rating provides comfortable headroom for the full complement of ten fans and two light bars. Acoustic output is rated at 26.4 dBA, keeping noise low under typical loads. Exceeding the 5 A limit or connecting the power cable to the wrong inlet risks damaging the LED beads.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $10.99
- Cheaper than about 70% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Black |
Questions about this item
What power supply connection does the controller require to run ten fans and two light bars?
The controller needs a 12 V supply capable of 5 A, plugged only into the marked power inlet on the panel.
Will the controller work with my existing 12 V fans that draw 0.28 A each?
Yes, each 12 V fan rated at 0.28 A can be connected to the ten 6‑pin fan ports.
How can I confirm the controller is operating correctly after installation?
Use the remote to cycle through the 368 colour modes and three music modes; the fans should change colour, speed and brightness accordingly.
More in Internal PSU & Riser Cables
Similar items
Nippon Labs POW-04412 12" Molex 5.25 Female to Female internal power cable
- 1 ft (0.3 m)
- Multi-Color
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





