AICOPYTO
AICOPYTO Rapid PETG Filament 1.75mm Black 1kg 30-600mm/s ±0.02mm
High-speed PETG filament prints at 30-600mm/s with ±0.02mm diameter tolerance on a 1kg cardboard spool
- Diameter1.75
- Product color1kg Rapid Petg Black
- Main materialPolyethylene Terephthalate Glycol
- Product weight1 kg
- Print up to 600 mm/s with rapid PETG formulation
- ±0.02 mm diameter tolerance for consistent extrusion
- Neatly wound cardboard spool reduces tangles and snapping
- Low warping and shrinkage versus PLA for reliable prints
- Good light transmittance with minimal stringing for clean details
1 kg Rapid PETG Filament
AICOPYTO Rapid PETG Filament in black comes on a 1 kg cardboard spool with a 1.75 mm diameter and ±0.02 mm tolerance. It is made for owners of FFF 3D printers who want a single material that prints fast and stays dimensionally accurate. The spool suits hobbyists and professionals needing consistent flow for functional parts.
Sustained high-speed printing
The filament is rated for print speeds from 30 to 600 mm/s and melts rapidly to maintain smooth extrusion during long jobs. Full mechanical winding and manual inspection reduce tangles and snapping over extended runs. Low shrinkage and good layer adhesion keep large or complex models dimensionally stable throughout the build.
Thermal behaviour and power
Extruder temperatures of 230 to 260 °C and a heated bed at 70 to 80 °C are recommended for this PETG. The material shows less warping than PLA and resists stringing at these settings. A 0.4 mm nozzle works with the specified speed and temperature range for clog-free output.
How it compares
Measured against everything we stock in 3D Printer Filament, at today’s prices. Recalculated every night.
- Price $19.99
- Cheaper than about 70% of the 305 comparable items (median $27.99).
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | AICOPYTO |
| Product color | 1kg Rapid Petg Black |
| Size & build | |
| Main material | Polyethylene Terephthalate Glycol |
| Diameter | 1.75 |
| Product weight | 1 kg |
Questions about this item
Will the extruder temperature of 230-260°C raise my printer's power draw or heat output during long prints?
The filament prints at 230-260°C nozzle temperature with a 70-80°C bed, so sustained power use matches any standard PETG profile on a typical FDM machine.
My printer only takes 1.75mm spools — does this 1kg cardboard spool fit without an adapter?
Yes, the 1.75mm ±0.02mm filament comes on a 1kg cardboard spool designed for almost all 1.75mm FDM printers, so no adapter is needed.
Can I run this at 600mm/s on an older printer with a 0.4mm nozzle?
The filament supports 30-600mm/s and is specified for a 0.4mm nozzle; actual top speed depends on your printer's motion system and cooling capacity.
More in 3D Printer Filament
Similar items
SUNLU PLA Matte Filament 1.75mm 1kg White
- 1000g Pla White
- Polylactic Acid
ANYCUBIC PLA Filament 1.75mm 1kg Black
- 1kg Pla Black
- Polylactic Acid





