We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Alcatel-Lucent

Alcatel-Lucent OmniSwitch 2360-P48X 48 Port Gig PoE+ 740W 2x 10G SFP+ network switch

SKU CH-V46H-22T9K

48 Gigabit PoE+ ports with a 740 W budget plus two 10G SFP+ uplinks and stacking for high-density networks

  • 48 Gigabit PoE+ ports power cameras and access points
  • 740 W PoE budget feeds every port at full 802.3at power
  • Two 10G SFP+ uplinks give 10 Gbps backbone speed
  • Two SFP+ stacking ports let multiple units act as one switch
  • 1RU rack-mount design fits dense cabinet deployments

High-density PoE+ access switch

The Alcatel-Lucent OmniSwitch 2360-P48X is a 1RU rack-mountable Layer 2 switch built for corporate networks that need both density and high power delivery. It provides 48 RJ-45 ports running at 10/100/1000 Base-T, each capable of 802.3at PoE+ to drive Wi-Fi 6 access points, IP cameras and VoIP endpoints. A 740 W total PoE budget is supplied by an integrated high-capacity internal AC power supply. Two dedicated 10G SFP+ uplinks and two SFP(+) stacking ports handle aggregation and resilience.

Suited for powered-edge deployments.

This switch fits environments where many powered devices must connect at the access layer and a single chassis must supply the full 740 W budget without external injectors. WebSmart+ management gives browser-based control for VLANs, QoS and security policies. Organisations that require Layer 3 routing, advanced CLI scripting or a smaller PoE budget should evaluate other platforms.

740 W PoE+ budget decides fit

The single specification that determines suitability is the 740 W total PoE+ power budget. If the combined draw of all connected cameras, access points and phones stays within this limit, the switch can power every port simultaneously; if the project exceeds it, a higher-budget chassis or additional switches are required.

How it compares

Measured against everything we stock in Ethernet & PoE Switches, at today’s prices. Recalculated every night.

Price $1,201.99
Pricier than about 68% of the 2,756 comparable items (median $483.49).

New to this? Buying networking gear with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How much heat and fan noise should I expect when the 740 W PoE budget is fully loaded all day?

The switch uses a high-capacity internal AC supply to deliver the full 740 W PoE budget; fan speed ramps with thermal load so sustained maximum draw will increase airflow and audible noise.

Which SFP+ transceivers and stacking cables do I need to buy separately to use the two 10 G uplinks and two stacking ports?

The two dedicated 10G SFP+ uplinks and two SFP(+) stacking ports accept standard SFP+ modules and direct-attach cables; choose single-mode, multimode or copper cables that match your link distances.

Will my existing 10/100/1000 Base-T devices and 802.3at PoE+ endpoints work without reconfiguration?

All 48 RJ-45 ports auto-negotiate 10/100/1000 Base-T and support 802.3at PoE+, so legacy copper devices and PoE+ cameras or access points connect and power up immediately.

More in Ethernet & PoE Switches

Similar items