Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects USB-A devices to USB-B peripherals at 480 Mbps over 1.8 m with shielded construction
This 1.8 m grey cable connects a USB-A host to a USB-B device such as a printer, scanner or external drive enclosure. It is built to the USB 2.0 specification with male connectors on both ends and a shielded design that supports the rated 480 Megabits per second data rate. The 1.8 m length suits typical desktop setups without excess slack.
Swap it in when the original cable is too short, has a broken connector or shows intermittent disconnects during print jobs. The upgrade is worth it if you need the full 1.8 m reach or a fresh shielded cable to eliminate signal errors on longer runs. It does not add bandwidth beyond the USB 2.0 limit, so devices that require USB 3.0 speeds will not benefit.
Under continuous load the shielded construction maintains the full USB 2.0 signalling rate without the drop-outs seen on unshielded or worn cables. The 2.82-ounce weight and 1.8 m length keep voltage drop low enough for reliable enumeration during long scan batches or multi-gigabyte print spools. No active electronics are present, so performance is limited by the host controller and device firmware.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Ports & slots | |
|---|---|
| Connection type | Micro USB to USB A |
The cable is 1.8 m long with male USB-A and male USB-B plugs; allow enough depth for the B connector to seat fully without bending the cable sharply.
Insert the USB-B male plug into the scanner port until it clicks, then connect the USB-A male plug to the computer; reversing the order can leave the B plug partially seated.
Replace it if the shielding is damaged, the plugs no longer latch securely, or data transfer drops below the 480 Mbit/s USB 2.0 rate during use.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?