Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
An 80 mm case fan spinning at 2600 RPM delivers 34 CFM airflow at 30 dBA noise with both 3-pin and 4-pin connectors
The Antec PRO 80MM is an 80 mm case fan that spins at 2600 RPM to deliver 34 CFM of airflow at a rated 30 dBA. It is intended for builders who need a compact cooling solution for tight chassis or targeted component airflow. The black plastic frame measures 3.14" x 3.14" x 0.99" and weighs approximately 0.3 lbs.
The fan ships with both a 3-pin and a 4-pin power connector for broad motherboard and controller compatibility. Mounting uses standard 80 mm screw holes, so no special brackets are required. The sleeve bearing keeps initial cost low but can become noisier over time compared with ball or fluid-dynamic bearings, especially if the fan is mounted horizontally.
At 34 CFM the fan provides enough volume to exhaust heat from small-form-factor cases, drive cages or GPU backplates where larger fans will not fit. Headroom is limited by the 80 mm diameter and 2600 RPM ceiling; it will not move sufficient air for high-wattage CPU coolers or multi-GPU configurations that demand higher static pressure or greater volumetric flow.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Antec |
| Model name | PRO 80MM |
| Product type | Case Fan |
| Product color | Black |
| Performance | |
| Rotational speed | 2,600 RPM |
| Airflow rate | 34 CFM |
| Power | |
| Power input connector | 3 / 4 Pin |
| Size & build | |
| Fan size | 80 mm |
| Bearing design | Sleeve |
| Product dimensions | 3.14 in × 3.14 in × 0.99 in |
| Shipping weight | 0.07 kg |
| Package size | 226 × 183 × 8 mm |
| Compatibility | |
| Compatible with | Case |
| In the box | |
| In the box | 238039 |
| Environment & compliance | |
| Operating noise | 30 dBA |
Use your motherboard BIOS or a hardware monitoring utility to read the fan header speed; it should report close to 2600 RPM at full duty cycle.
The package includes the 80 mm sleeve-bearing fan with both 3-pin and 4-pin connectors and mounting screws; no extra parts are required for a standard case fan slot.
Plug the 4-pin connector into a PWM header for automatic speed control; use the 3-pin connector if your board only offers voltage-controlled headers.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?