Aomoproing 8K Fiber Optic DisplayPort Cable 10m
Fiber-optic DisplayPort 1.4 cable carries 32.4 Gbps for 8K at 60 Hz or 4K at 240 Hz over 10 metres
Cable Length 33 Feet
- 8K 7680×3840 at 60 Hz for ultra-sharp detail
- 4K 3840×2160 at 240 Hz for fluid motion
- 4 Gbps bandwidth via DisplayPort 1.4 HBR3
- 10 m fiber-optic reach without signal loss
- HDR10 and DSC 1.2 support for vivid colour depth
10-metre fibre-optic DisplayPort 1.4 cable
This 10-metre fibre-optic cable carries DisplayPort 1.4 signals up to 32.4 Gbps between a PC or laptop and a monitor, projector or HDTV. The hybrid copper-and-fibre construction maintains full bandwidth over the full 10-metre run without the signal loss typical of passive copper at this length.
8K 60 Hz and 4K 240 Hz headroom
The link supports 7680×3840 at 60 Hz, 3840×2160 at up to 240 Hz and 3440×1440 at 60 Hz with HBR3 and DSC 1.2 compression. At 8K 60 Hz the 32.4 Gbps ceiling is fully used, so higher refresh rates at that resolution are not possible; 4K 144 Hz or 240 Hz operation leaves bandwidth headroom for HDR10 metadata.
Male-to-male 20-pin connectors for in-wall runs
Each end terminates in a standard 20-pin male DisplayPort plug, allowing direct connection to graphics cards and display inputs without adapters. The slim fibre-optic jacket suits in-wall installation, while the tinned-copper auxiliary conductors carry the auxiliary channel and power for plug-and-play operation.
How it compares
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
- Price $42.99
- Pricier than about 78% of the 3,801 comparable items (median $15.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Aomoproing 16ft 8K Fiber Optic DisplayPort Cable DP1.4 HBR3 32.4Gbps
Aomoproing 8K 4K DisplayPort 1.4 HBR3 Optical Fiber Cable 5m 16ft
Questions about this item
Will the 10m fiber-optic DisplayPort 1.4 cable drive an older 4K 60Hz monitor from a current graphics card?
Yes — the cable carries the full 32.4Gbps HBR3 link, so any DisplayPort 1.4 or earlier source will negotiate the monitor's native 4K 60Hz mode without signal loss.
How can I verify the cable is delivering 8K 60Hz or 4K 144Hz after installation?
Open the GPU control panel or monitor OSD and confirm the active resolution reads 7680x3840 at 60Hz or 3840x2160 at 144Hz with HDR10 enabled.
Does the package include only the male-to-male DisplayPort 20-pin cable or are adapters supplied?
The box contains the 10m fiber-optic cable with 20-pin male connectors on both ends; no adapters or extra accessories are included.
More in DisplayPort Monitor Cables
Similar items
Nippon Labs 50DP14V-MM-10 displayport cable 10 ft 1.4 HBR3 32.4 Gbps 8K 60Hz
- 10 ft (3.05 m)
- DisplayPort Cable
Fervit USB-C to USB-C AR Glasses Cable 6.6in 39.3in USB 3.2 Gen 2 PD 65W 4K
Omni Gear DP-10-HDMI 10 ft DisplayPort cable
- 10 ft (3.05 m)
- DisplayPort to HDMI
Fervit Active DisplayPort to HDMI Cable 6.6ft 4K 60Hz 2K 144Hz 1080p 144Hz
Tripp Lite P582-020 DisplayPort to HDMI cable 20 ft 1080p
- 20 ft (6.1 m)
- DisplayPort to HDMI










