Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Splits a motherboard 9-pin USB 2.0 header into four female ports with 30 cm shielded cable and adhesive backing
This internal splitter converts a single motherboard USB 2.0 header into four female ports for connecting front-panel devices. The 30 cm cable includes wire-belt shielding and a 3M adhesive backing for secure mounting inside the chassis. A short-circuit prevention outlet design protects pins from accidental bridging during installation. It draws power directly from the mainboard header.
Suits PC builders who need extra internal USB 2.0 ports for fan controllers, RGB light bars or additional front-panel connectors. The 500 mA total current limit from the header means it cannot support multiple high-draw devices such as charging phones or bus-powered drives. Systems requiring more than four ports or higher current per port should look at a powered hub instead.
The decisive specification is the 1-to-4 port multiplication from one 9-pin USB 2.0 header with a shared 500 mA current budget. If the motherboard header cannot supply enough current for all attached devices, the splitter will not function reliably. Cable length is 30 cm (11.8 in).
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Ports & slots | |
|---|---|
| Connection type | Lighting Connector to USB A |
The 9-pin male connector plugs into a standard mainboard USB 2.0 header.
Peel the 3M automotive adhesive tape on the back and press the unit onto the motherboard or chassis.
The combined draw of all connected USB 2.0 devices must not exceed the motherboard header's 500 mA supply.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?