Aomoproing USB 3.0 Active Extension Cable 33 ft
Extends USB 3.0 connections up to 33 ft with a built-in signal booster chip for reliable 5 Gbps data transfer
Cable Length 33 Feet
- Extend USB devices up to 33 ft with built-in signal booster chip
- Transfer data at up to 5 Gbps with USB 3.0 active extension
- Multi-layer shielding minimises interference for reliable long-distance connections
- Plug-and-play compatibility with printers, webcams, VR headsets and hard drives
- Backward compatible with USB 2.0 speeds of 480 Mbps
Long-distance USB 3.0 extension
This 33 ft active cable extends a USB Type-A connection using a built-in signal booster chip. It supports USB 3.0 transfer rates up to 5 Gbit/s, roughly ten times the 480 Mbit/s of USB 2.0. Multi-layer shielding minimises interference over the long run. The cable is plug-and-play with no driver required.
Users needing remote device placement
The cable suits setups where a printer, webcam, VR headset, Xbox controller, hard drive or USB hub must sit far from the host computer. It is not for buyers who need a passive cable shorter than the active electronics require. It does not add ports, so anyone needing multiple simultaneous connections should look at a powered hub instead.
Built-in signal booster chip
The integrated smart chip regenerates the USB 3.0 signal so data travels the full 33 ft without attenuation. Multi-layer shielding preserves signal integrity in electrically noisy environments. No external power adapter or software driver is bundled, keeping the installation simple for the listed peripherals.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $38.99
- Pricier than about 90% of the 15,187 comparable items (median $14.99).
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
4 more in the same range
Aomoproing USB 3.0 Active Extension Cable 50ft Type-A Male to Female
Questions about this item
What type of USB port does my computer need for the 33 ft cable to work?
The cable uses a standard USB Type-A male connector, so your computer needs a USB Type-A port that supports USB 3.0 for the rated 5 Gbit/s speed.
Will my older USB 2.0 printer work through this active extension cable?
Yes, the cable is backward compatible with USB 2.0 devices; the 480 Mbit/s printer will operate normally through the extender.
How can I verify the cable is delivering the full 5 Gbit/s transfer rate after setup?
Connect a USB 3.0 flash drive or hard drive and run a file transfer; sustained speeds near 5 Gbit/s confirm the signal booster chip is working correctly.
More in USB Cords & Extension Cables
Similar items
Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
Tripp Lite U042-025 USB 2.0 A to B Active Cable 25 ft
- USB A to USB B
- 25 ft (7.62 m)
Tripp Lite U022-010 USB 2.0 A to B cable 10 ft
- USB A to USB B
- 10 ft (3.05 m)
STARTECH USB3C2ESAT3 USB-C to eSATA cable
- Drive Connectors: 1…
- USB-C to eSATA Cable
STARTECH USB31AC50CM USB 3.1 Gen 2 cable USB-A to USB-C 0.5m 10Gbps
- USB A to USB C
- USB 3.1
HanCenDa XCD-951 Starlink Mini 2-in-1 Ethernet Power Cable 16.4FT
- Starlink Mini
- Starlink Mini









