Apple EZDPR230 12VHPWR 16AWG 90° GPU Extension Cable .3m Black
A .3 m 16 AWG extension cable with a 90° 12V-2x6 connector delivers up to 600 W to RTX 40-series cards in tight builds
- Refresh frequency0.3 m
- Rated speedTest Value
- First connector1x 12 V-2 × 6 male
- Second connector1x 12VHPWR PCIe Gen5 female
- Connector detailsDVI to DVI
- Connector genderMale to Female
- Sleek Shield aesthetic enhances build appearance
- Highly flexible 16AWG wire eases routing in tight spaces
- Compact 90° angle suits ITX and ATX cases
- Soldered joints resist detachment from bending
- Supports 600W for RTX 40 series cards
Shield PCIe 5.1 GPU Extension Cable
This 0.3 m black extension cable connects a 12V-2x6 male plug to a 12VHPWR PCIe Gen5 female socket. It is built for ATX 3.1 power delivery up to 600 W and suits RTX 40-series cards such as the 4070, 4080 and 4090. The 16 AWG tinned copper conductors and alloy copper terminals give a sleek, shielded look with pre-installed combs for tidy routing in compact ITX or ATX builds.
Thermals noise and power draw
The 16 AWG wire gauge provides efficient current transmission and good heat resistance under sustained 600 W loads. Soldered joints on both connectors reduce resistance and the risk of detachment from bending, keeping voltage drop low and connector temperatures stable. The nylon-sleeved, highly flexible cable runs quietly through tight channels without adding audible vibration or airflow restriction.
Upgrade path and when it matters
This extension replaces a short or stiff factory 12VHPWR lead when the PSU cable cannot reach a recessed GPU socket or when a 90° angle eases side-panel clearance. It also bridges a PSU that only offers PCIe 8-pin outputs by using the original splitter. The jump is worth it when cable length or bend radius prevents a secure, gap-free seat — especially on 4090-class cards — but it is not rated for the extreme power spikes of an RTX 5090.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $32.99
- Pricier than about 73% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Apple |
| Model name | EZDPR230 |
| Product type | Extension Cable |
| Product color | Black |
| Performance | |
| Rated speed | Test Value |
| Display | |
| Refresh frequency | 0.3 m |
| Ports & slots | |
| First connector | 1x 12 V-2 × 6 male |
| Second connector | 1x 12VHPWR PCIe Gen5 female |
| Connector details | DVI to DVI |
| Connector gender | Male to Female |
Questions about this item
How do I install the 90° 12VHPWR extension without leaving a gap?
Plug the male 12V-2x6 end into the GPU until it clicks, then attach the female 12VHPWR side to the PSU cable; the 90° bend keeps the run tight in ITX cases.
Will the 16AWG sleeved cable need any upkeep after months of use?
The soldered joints and nylon sleeve are maintenance-free; just reseat both connectors if you ever move the card.
What is the first limit I hit when running an RTX 4090 at full load through this .3 m extension?
The cable is rated for 600 W continuous; sustained spikes above that on a 4090 can exceed the spec.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister HQ-02-15011H double-lamp large-port high-voltage bar internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





