Aquacomputer USB 2.0 A-plug to 5 Pin Miniature Connector VISION 200 cm internal power cable
Connects an Aqua Computer USB device with a miniature header to a motherboard A-receptacle using a 200 cm cable
- Product colorBlack
- Key featuresThis cable can be used to connect an Aqua Computer USB devic
- Connects Aqua Computer VISION devices to motherboard USB headers
- 5-pin miniature connector fits VISION USB header exactly
- Standard USB 2.0 Type-A plug for broad compatibility
- 200 cm length gives flexible internal routing
- Supplied as single cable ready for installation
Aquacomputer USB 2.0 Internal Cable
This Aquacomputer cable connects a USB device with a miniature header to a standard USB 2.0 A-receptacle inside the computer. It measures 200 cm in length and comes in black. The part is designed specifically for Aqua Computer hardware such as the VISION module. It provides a direct internal link for USB control and monitoring.
Replaces Shorter or Mismatched Headers
Builders who need to route a miniature USB device to a motherboard A-port use this cable to bridge the connection. The 200 cm length supports routing behind motherboard trays or through large chassis without tension. The jump is worth it when the stock cable is too short or uses the wrong connector type. It removes the need for improvised adapters or external dongles.
Limited to USB 2.0 Speed and Miniature Pinout
The cable carries only USB 2.0 signals through its 5-pin miniature connector and A-plug. Bandwidth is capped at the USB 2.0 specification rate. It cannot support USB 3.0 or higher throughput devices. The fixed pinout fits Aqua Computer miniature headers only and will not mate with standard internal USB headers.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Typical for this category: the median of 7,693 items is $14.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Aquacomputer |
| Model name | 1013533 |
| Product color | Black |
Questions about this item
What internal header does the 5-pin miniature connector on this cable plug into?
The 5-pin miniature connector fits the USB header on Aquacomputer devices such as the VISION controller.
Which end of the 200 cm cable connects to the motherboard or hub, and which orientation does the A-plug require?
The USB 2.0 A-plug inserts into a standard Type-A receptacle on the motherboard or internal hub; the keyed 5-pin end attaches to the device header.
If the 5-pin miniature connector wears out, can it be replaced separately?
The connector is moulded onto the 200 cm cable, so the entire cable assembly must be replaced if the header end fails.
More in Internal PSU & Riser Cables
Similar items
Silverstone CPF01 1-to-2 PWM Fan Splitter Cable 3.94 in
- 3.94 in (10 cm)
- Fan Power Cables
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
STARTECH ATXP4EXT 8in ATX12V 4 Pin P4 CPU Power Extension Cable
- 0.5 ft (0.15 m)
- Cable Connectors
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





