Clover Technologies Group, LLC CF064-67901-REF refurbished maintenance kit 225000 yield
- Printer Accessories
- Maintenance Kit
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Replacement battery for MC9000, MC9060, MC9090, MC9097, MC9190 and MC9200 barcode scanners with 2600 mAh capacity, 18% higher than the OEM 2200 mAh rating
This new replacement battery fits Motorola and Symbol MC9000-G/K series barcode scanners including the MC9060-G/K, MC9090-G/K, MC9097-G/K, MC9190-G/K and MC9200-G/K models. It fully replaces OEM part numbers KT-21-61261-01 and 21-65587-02. The 2600 mAh capacity rating is 18 percent higher than the OEM 2200 mAh rating. It is intended for operations that need longer run times between charges on these specific scanner models.
The increased 2600 mAh capacity extends the operating window before a recharge is required compared with the original 2200 mAh cell. This reduces the frequency of battery swaps during continuous shift work on the supported MC9000-G/K series devices. No additional software, cables or mounting hardware are included in the package.
The battery is designed as a direct mechanical and electrical replacement for the listed OEM part numbers. Installation follows the standard battery removal and insertion procedure for the MC9000-G/K chassis. The main risk is ordering this battery for scanner models outside the MC9000-G/K family, where the connector or form factor will not match. Buyers who need a battery for other Motorola or Symbol scanner series cannot use this part.
Measured against everything we stock in Print & Scan Accessories, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The 2600mAh pack is a direct swap for OEM KT-21-61261-01 and 21-65587-02; replace when run-time drops below your shift requirement.
The 2600mAh capacity sets the runtime ceiling — 18% more than the original 2200mAh — so the scanner stops when the charge is depleted.
No active cooling or extra draw is mentioned; the pack simply replaces the OEM cell and delivers the rated 2600mAh under normal scanner load.
More in Print & Scan Accessories
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?