Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 120 mm case fan with a 28 mm thick frame, 20 addressable RGB LEDs on both sides and PWM control up to 1600 RPM at 23 dB(A)
The ASUS Prime MR120 ARGB Reverse is a 120 mm case fan with a 28 mm thick frame and 20 addressable RGB LEDs. Its reverse blade orientation pushes air in the opposite direction to standard fans, making it suitable for radiator pull configurations or specialised airflow paths. Aura Sync compatibility allows lighting coordination with supported motherboards and components.
PWM control adjusts the fan speed up to 1600 RPM while keeping noise as low as 23 dB(A). The fan uses a conventional 4-pin PWM connector for speed control and a standard 3-pin 5 V addressable RGB header for lighting. Installation follows normal 120 mm screw patterns, but the thicker 28 mm frame requires checking clearance against adjacent components, cables or radiator end tanks.
Verify that your case or radiator mounting holes accommodate a 28 mm frame depth without fouling side panels, memory modules or VRM heatsinks. Confirm the motherboard provides a 5 V 3-pin ARGB header and a 4-pin PWM fan header; older 4-pin 12 V RGB headers are not compatible. Ensure the reverse airflow direction matches the intended push or pull role in your cooling loop.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Size & build | |
|---|---|
| Shipping weight | 0.27 kg |
| Package size | 142 × 127 × 38 mm |
Use your motherboard's BIOS or fan-control software to monitor the real-time speed reading; it should reach 1600 RPM under load when the PWM curve is set to maximum.
The pack contains one 120 mm fan with a 28 mm thick frame and 20 addressable RGB LEDs; an ARGB controller or a motherboard with a 5 V ARGB header is required for lighting control.
Pick the reverse version if you plan to mount the fan as an exhaust where the blades need to pull air through the radiator or heatsink from the opposite side of the frame.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?