Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
8 GB DDR3-1600 ECC registered server memory module running at 1.35 V with 240 pins
This 8 GB DDR3 module runs at 1600 MHz with a PC3 12800 rating and 1.35 V operating voltage. It uses a 240-pin form factor and includes error-correcting code with registered signal processing. The part is intended for servers and workstations that require registered ECC memory. It is not for desktop boards that accept only unbuffered non-ECC DIMMs.
The 1.35 V rating reduces power consumption compared to standard 1.5 V DDR3 modules. Lower voltage typically results in less heat output during normal operation. No active cooling or fan is required for this component. Acoustic noise is determined by the system chassis and CPU coolers rather than the memory itself.
The module provides registered signal processing and ECC error checking as a combined feature. Systems must support both registered buffering and ECC to use this part. Motherboards designed for unbuffered memory or those without ECC capability will not work with this DIMM.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Axiom |
| Model name | 7100790-AX |
| Total capacity | 8 GB |
| Product type | 240-Pin DDR3 SDRAM |
| Performance | |
| Rated speed | DDR3 1600 (PC3 12800) |
| Memory | |
| ECC support | Yes |
| Buffer type | Registered |
| Power | |
| Rated voltage | 1.35 V |
| Size & build | |
| Shipping weight | 0.09 kg |
| Package size | 152 × 76 × 25 mm |
Align the single off-centre notch on the 240-Pin DDR3 stick with the key in the server DIMM slot, press straight down until both side clips click, and verify the 1.35V low-voltage requirement matches the platform.
Registered ECC DDR3 modules have no moving parts; plan only for firmware updates on the host and replace a stick if the system logs correctable error thresholds or a DIMM fails POST.
The 1600 MHz data rate and PC3-12800 bandwidth ceiling are reached whenever the memory controller saturates all channels, so sustained throughput cannot exceed that rated ceiling.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?