Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
8GB ECC Registered DDR3 1600 server memory module runs at 1.35V on a 240-pin DIMM
This Axiom 7104197-AX module provides 8 GB of DDR3 SDRAM operating at 1600 MHz with a PC3-12800 rating. It uses a 240-pin DIMM form factor and runs at a low 1.35 V. Error-correcting code and registered signal processing are built in for data integrity.
This module fits systems that specifically require registered (buffered) DDR3 DIMMs with ECC support. It is not compatible with platforms that accept only unbuffered non-ECC memory or that use a different DDR generation. Buyers needing higher densities or different speeds should verify their motherboard specifications first.
The registered architecture places a register between the DRAM and the memory controller to reduce electrical load. Combined with ECC, this allows the module to detect and correct single-bit errors. This specification is the deciding factor for compatibility with registered DDR3 server platforms.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Axiom |
| Model name | 7104197-AX |
| Total capacity | 8 GB |
| Product type | 240-Pin DDR3 SDRAM |
| Performance | |
| Rated speed | DDR3 1600 (PC3 12800) |
| Memory | |
| ECC support | Yes |
| Buffer type | Registered |
| Power | |
| Rated voltage | 1.35 V |
| Size & build | |
| Shipping weight | 0.09 kg |
| Package size | 152 × 76 × 25 mm |
The module runs at 1600 MHz, which is the DDR3-1600 standard also labelled PC3-12800.
It fits a standard 240-pin DDR3 DIMM slot and the board thickness is 157.5 mil.
Align the notch with the slot key, press firmly until both side clips lock, and ensure the system supports registered ECC memory.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?