Axiom 721000-002-AX 10GBASE-SW iSCSI SFP+ transceiver
10 GBps SFP+ transceiver operates at 850 nm wavelength for 300 m multimode links
- 10 Gbps data rate for high-speed iSCSI storage links
- 850 nm wavelength optimised for multimode fibre deployments
- 300 m maximum reach covers typical data-centre rack distances
- LC duplex interface ensures secure, low-loss connections
- SFP+ form factor fits standard HP-compatible switch and server ports
Axiom 10GBASE-SW SFP+ Transceiver
The Axiom 721000-002-AX is a 10 GBps SFP+ transceiver built for 10GBASE-SW iSCSI links. It uses an 850 nm wavelength and LC interfaces to connect switches, servers or storage arrays over multimode fibre. The module is new and matches the HP 721000-002-AX part number for direct replacement.
Suits 10 Gb iSCSI over multimode fibre
This transceiver fits networks running 10 Gb iSCSI where the link distance stays within 300 m on OM3 or OM4 multimode cable. It is not a fit for buyers who require single-mode reach or who need higher line rates for newer storage fabrics. The SFP+ form factor limits use to ports that accept this specific module type.
300 m maximum transfer distance
The 300 m reach at 850 nm is the single specification that decides whether this part works in a given link. Longer runs or single-mode cabling will not operate with this module. Verify the fibre type and distance before purchase.
How it compares
Measured against everything we stock in SFP & SFP+ Transceiver Modules, at today’s prices. Recalculated every night.
- Price $185.99
- Pricier than about 58% of the 1,470 comparable items (median $138.49).
New to this? Buying networking gear with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Which switch or server port must I already have free to install this SFP+ transceiver?
You need an available SFP+ slot that supports 10 Gbps Ethernet or 10GBASE-SW iSCSI, typically found on 10 Gigabit switches, routers or server NICs.
Will this 850 nm module work on the same multimode fibre links as my older 10 Gbps optics?
Yes — if the existing link uses OM3 or OM4 multimode fibre with LC connectors and runs at 10 Gbps, the 850 nm wavelength and 300 m reach match those parameters.
How can I confirm the link is operating at the rated 10 Gbps after I insert the module?
Check the switch or NIC port statistics: the interface should report a 10 Gbps link speed, zero CRC errors and an RX power level within the normal range for 850 nm multimode.
More in SFP & SFP+ Transceiver Modules
Similar items
AddOn FTLX1471D3BCL-AO SFP+ transceiver 10 Gbps 1310nm 220m LC
- SFP+
- Finisar®
HPE JD089B Gigabit Ethernet SFP Transceiver 1000Base-T RJ-45
- Transceiver
- HCRP, SPP
AddOn GLC-LH-SMD-AO-5PK SFP transceiver 10km 1310nm LC DOM 5-pack
- Cisco®
- Transceiver
STARTECH MASFP10GBLR SFP+ transceiver 10GBASE-LR 10km 1310nm LC
- Transceiver
- IEEE 802.3ae 10 Gbi…
Cisco Systems, Inc. GLC-FE-100FX-RGD= 100 Mbps 1310nm SFP transceiver
- MMF
- 1310 nm





