Axiom 816929-B21-AX svga cable 3.84TB SATA
Enterprise internal SSD delivers 3.84 TB capacity with 540 MB/s reads and 480 MB/s writes over SATA 600
- Product typeOffice Products
- High-capacity 3.84 TB storage for demanding workloads
- Fast 540 MB/s reads accelerate data access
- Sustained 480 MB/s writes handle heavy write loads
- SATA 600 interface ensures broad server compatibility
- Hot-swappable 2.5" design simplifies drive replacement
Enterprise SSD for SATA bays
The Axiom EV200 is a 3.84 TB internal solid-state drive built for 2.5-inch hot-swap bays. It connects through a SATA 600 interface and delivers sequential reads up to 540 MB/s with writes up to 480 MB/s. The drive carries RoHS certification and a three-year limited warranty.
Suits capacity-focused SATA deployments
This unit fits servers and arrays that use 2.5-inch SATA slots and need large flash capacity with hot-swap convenience. It is not for systems that require a different physical form factor or a non-SATA interface. Buyers needing higher throughput than 540 MB/s should consider other technologies.
3.84 TB capacity decides fit
The single specification that determines suitability is the 3.84 TB capacity. If the workload and budget align with that capacity in a SATA 600 drive, the EV200 matches the requirement; if a different capacity is needed, this is not the correct part.
How it compares
Measured against everything we stock in VGA Monitor Cables, at today’s prices. Recalculated every night.
- Price $3,623.99
- Pricier than about 98% of the 1,119 comparable items (median $10.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Axiom |
| Product type | Office Products |
| Size & build | |
| Shipping weight | 0.27 kg |
| Package size | 138 × 79 × 16 mm |
Questions about this item
How much power does the 3.84 TB EV200 SSD draw during sustained read at 540 MB/s?
The drive uses the SATA 600 interface and fits a 2.5 inch hot-swap bay, so power draw is handled by the host system's backplane.
What host connector and bay size are required to install this 2.5 inch hot-swap drive?
A SATA 600 port and a standard 2.5 inch hot-swap drive bay are needed for the 3.84 TB EV200 SSD.
Will the SATA 600 interface on this 3.84 TB EV200 SSD work with a server backplane that only supports SATA 300?
Yes, the SATA 600 interface is backward compatible and will operate at the lower 300 MB/s link speed on older backplanes.
More in VGA Monitor Cables
Similar items
Kramer Electronics 1:4 4K UHD HDMI to HDBaseT Distribution Amplifier
4XEM 4X35MF15 svga cable 15 ft 3.5 mm male to female
- Cable
- Black





