Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
32 GB DDR3 ECC registered DIMM model A6222874-AX running at 1333 MHz with CL9 latency and 1.35 V operation
This 32 GB Axiom module delivers ECC-registered DDR3 1333 (PC3 10600) operation for compatible servers and workstations. Registered signal processing and error-correcting code protect data integrity in multi-module configurations. The 240-pin DIMM form factor fits standard DDR3 slots.
Rated at 1.35 V, the module runs at a lower voltage than standard DDR3, reducing power consumption and heat output under typical server workloads. CL9 latency at 1333 MHz provides stable timing without increased electrical stress. No active cooling is required for normal operation.
ECC Registered operation enables the memory controller to detect and correct single-bit errors while reducing electrical load on the bus. This allows larger memory arrays than unbuffered alternatives in supported platforms. The 157.5 mil thickness matches standard DIMM dimensions for direct installation.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Axiom |
| Model name | A6222874-AX |
| Total capacity | 32 GB |
| Product type | 240-Pin DDR3 SDRAM |
| Performance | |
| Rated speed | DDR3 1333 (PC3 10600) |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Power | |
| Rated voltage | 1.35 V |
| Size & build | |
| Shipping weight | 0.09 kg |
| Package size | 152 × 76 × 25 mm |
Align the 240-pin DDR3 module with the server DIMM slot key notch, press firmly until both retaining clips click, then verify the 1.35V operating voltage is recognised in BIOS to ensure the registered buffer initialises correctly.
The module itself requires no scheduled maintenance; ECC corrects single-bit errors on the fly, but if multi-bit errors accumulate beyond correction the 32GB DIMM must be replaced as a unit.
The DDR3-1333 (PC3-10600) interface caps sustained bandwidth at 10600 MB/s per module, so throughput saturates before the registered buffer or 1.35V thermal envelope becomes the bottleneck.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?