Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
2GB DDR2 533 ECC unbuffered server module with CL4 latency and 1.80V operation
Axiom AX2533E4S/2G is a 2GB DDR2 533 (PC2 4200) ECC Unbuffered DIMM built to a 240-pin form factor. It operates at 1.80V with a CAS latency of CL4. The module is validated for Gateway E-9220, Intel Desktop Board D955 and D975, Server Board SE7230 and SUPERMICRO PDSG4 systems.
This module fits administrators maintaining DDR2-era servers or workstations that require ECC unbuffered memory. It is not for systems that only accept registered DIMMs, platforms needing higher density than 2GB per slot, or boards limited to non-ECC memory. Buyers without a compatible DDR2 ECC platform cannot use this part.
The decisive specification is the 240-pin DDR2 533 (PC2 4200) ECC unbuffered interface. Only motherboards with DDR2 slots that support unbuffered ECC at this speed and pin count will accept the module. Verify the board manual for DDR2 ECC unbuffered compatibility before ordering.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Axiom |
| Model name | AX2533E4S/2G |
| Total capacity | 2 GB |
| Product type | 240-Pin DDR2 SDRAM |
| Performance | |
| Rated speed | DDR2 533 (PC2 4200) |
| Memory | |
| CAS latency | CL4 |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Power | |
| Rated voltage | 1.8 V |
| Size & build | |
| Shipping weight | 0.09 kg |
| Package size | 305 × 76 × 25 mm |
Align the notch with the slot key, press straight down until both retaining clips click, then verify the server BIOS detects the full 2GB at 533 MHz.
No routine maintenance is required; replace only if memory diagnostics report correctable errors rising above threshold or a DIMM fails POST.
The DDR2 533 bus bandwidth and CL4 latency ceiling constrain throughput before voltage or thermal limits become factors.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?