Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
4GB DDR3 1600 ECC unbuffered server memory with 1.35V low-voltage operation and 240-pin form factor
This is a 4 GB DDR3 ECC unbuffered module built for servers that require error-correcting memory without registered signalling. It suits maintenance of older platforms that still use 240-pin DDR3 slots and need the 1.35 V operating voltage.
Running at 1.35 V keeps power draw low and heat output modest in typical server workloads. The unbuffered design adds no extra register latency or active components, so acoustics depend only on the system fans moving air across the DIMMs.
The module operates at 1600 MHz, labelled PC3 12800, so it must be installed in a system whose memory controller supports that exact DDR3 1600 data rate. Boards limited to lower DDR3 speeds or requiring registered DIMMs will not work with this part.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Axiom |
| Model name | AX31600E11Z/4L |
| Total capacity | 4 GB |
| Product type | 240-Pin DDR3 SDRAM |
| Performance | |
| Rated speed | DDR3 1600 (PC3 12800) |
| Memory | |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Power | |
| Rated voltage | 1.35 V |
| Size & build | |
| Shipping weight | 0.09 kg |
| Package size | 178 × 76 × 25 mm |
Align the notch on the 240-pin DDR3 module with the slot key, press down firmly until both retaining clips click shut, and verify the 1.35V setting is selected in BIOS so the 1600MHz speed is applied.
The 4GB ECC unbuffered DDR3 has no moving parts and requires no scheduled maintenance; replacement is only needed if a memory test reports correctable errors rising or a module fails to post.
The 1.35V DDR3-1600 modules are rated for standard server operating temperatures; the first limit under sustained load is the thermal envelope of the 240-pin DDR3 package, so adequate case airflow must be maintained.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?