Axiom QSFP-4SFP10G-CU3M-AX 40G QSFP+ to 4x 10G SFP+ DAC 10 ft
Splits a 40 Gbps link into four 10 Gbps channels over a 10 ft passive twinax cable
- Product typeTransceiver
- Transfer speed40 Gbit/s
- Product weight1.25 lb (0.57 kg)
- 40 Gb/s aggregate bandwidth splits into four 10 Gb/s channels
- Passive twinaxial construction needs no external power supply
- 10 ft reach connects adjacent racks without signal boosters
- Cisco-compatible QSFP+ to 4× SFP+ breakout simplifies mixed-speed deployments
- Light 1.25 lb cable eases routing in dense patch panels
Breakout Cable for 40G to 10G Links
This passive direct-attach cable splits a single 40G QSFP+ port into four independent 10G SFP+ connections. It is built for network engineers who need to disaggregate high-density uplinks without adding transceivers or active gear. The 10 ft twinaxial assembly reaches across adjacent rack units in standard cabinets. Buyers who require longer runs or active signal conditioning will need a different solution.
Passive Twinax Thermal Profile
Because the cable contains no active components, it draws negligible power and adds no measurable heat to the rack. Operation is completely silent, with no fans or electronic noise to consider in dense deployments. The 1.25 pound weight is supported entirely by the host cage latches. Installations that demand powered signal regeneration for extended reach cannot use this passive assembly.
Cisco-Coded Compatibility Label
The cable is programmed for Cisco equipment recognition, allowing the switch to identify the link and apply appropriate port policies without manual configuration. This coding removes the need for third-party workaround commands on supported platforms. Networks running non-Cisco operating systems that reject coded cables will not accept this assembly.
How it compares
Measured against everything we stock in SFP & SFP+ Transceiver Modules, at today’s prices. Recalculated every night.
- Price $223.99
- Pricier than about 63% of the 1,470 comparable items (median $138.49).
New to this? Buying networking gear with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Axiom |
| Model name | QSFP-4SFP10G-CU3M-AX |
| Part number | QSFP-4SFP10G-CU3M-AX |
| Product type | Transceiver |
| Performance | |
| Transfer speed | 40 Gbit/s |
| Size & build | |
| Product weight | 1.25 lb (0.57 kg) |
Questions about this item
How do I insert the QSFP+ end without damaging the latch?
Push the QSFP+ connector straight into the switch port until the pull-tab clicks; forcing it at an angle bends the internal pins.
When should I plan to replace this 10 ft passive DAC?
Replace it if the cable jacket shows kinks, the pull-tabs no longer latch, or link errors appear after rack moves.
What distance limit appears first when running 40 Gbps through this 10 ft assembly?
The 10 ft twinaxial length is the fixed reach; signal integrity drops beyond that without active optics.
More in SFP & SFP+ Transceiver Modules
Similar items
STARTECH SFP10GSRSST SFP transceiver 10GBASE-SR 850nm 300m
- Transceiver
- IEEE 802.3ae 10GBAS…
HPE JD089B Gigabit Ethernet SFP Transceiver 1000Base-T RJ-45
- Transceiver
- HCRP, SPP
HPE S0G18A 10GBase-T RJ45 30m SFP transceiver
- HPE
- Transceiver
STARTECH MASFP10GBLR SFP+ transceiver 10GBASE-LR 10km 1310nm LC
- Transceiver
- IEEE 802.3ae 10 Gbi…
Axiom E1MG-LHA-OM-AX 1000BASE-ZX SFP transceiver 1.25 Gbps 1550 nm SMF 0-70 °C
- Transceiver
- IEEE 802.3, IEEE 80…





