Axiom SFP-10G-TX-AG-AX 10GBASE-T SFP+ transceiver RJ-45 30m
SFP+ transceiver delivering 10 Gbps over copper RJ-45 links up to 30 metres
- Port countRJ-45
- Product typeTransceiver
- Supported standardsIEEE 802.3an
- Network cablingCopper
- Maximum range30m
- Transfer speed10GBASE-T
- 10 Gbps over copper with RJ-45 convenience
- Reaches 30 m on standard twisted-pair cabling
- IEEE 802.3an compliant for 10GBASE-T networks
- SFP+ MSA form factor fits standard switch slots
- RoHS compliant and 100 % Avago compatible
10GBASE-T SFP+ transceiver for copper links
This SFP+ transceiver delivers 10GBASE-T connectivity over an RJ-45 port. It fits any SFP+ cage that accepts the SFP MSA form factor and targets network engineers extending 10 GbE over existing copper cabling. The module is RoHS compliant and built to the IEEE 802.3an standard for interoperability.
30-metre reach on Cat6a or better
The transceiver supports links up to 30 metres when used with Category 6a or higher twisted-pair cable. Performance drops off beyond that distance because the 10GBASE-T PHY cannot maintain the required signal-to-noise ratio on longer copper runs. Shorter patches on Cat6 may work but are not guaranteed by the standard.
SFP+ cage and 10GBASE-T PHY constraints
The SFP+ footprint limits power draw and heat dissipation, so the onboard PHY operates at the edge of its thermal envelope. The RJ-45 connector adds insertion loss that consumes the link budget, leaving no margin for extra patch panels or poor terminations. Auto-negotiation falls back to lower speeds only if the link partner advertises them.
How it compares
Measured against everything we stock in SFP & SFP+ Transceiver Modules, at today’s prices. Recalculated every night.
- Price $171.99
- Pricier than about 56% of the 1,470 comparable items (median $138.49).
New to this? Buying networking gear with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Axiom |
| Model name | SFP-10G-TX-AG-AX |
| Product type | Transceiver |
| Performance | |
| Transfer speed | 10GBASE-T |
| Connectivity | |
| Supported standards | IEEE 802.3an |
| Network cabling | Copper |
| Maximum range | 30m |
| Ports & slots | |
| Port count | RJ-45 |
Questions about this item
Will the SFP-10G-TX-AG-AX work in a legacy switch that only supports 1G SFP modules?
No, the module operates at 10GBASE-T and requires an SFP+ port that supports 10 Gb/s; a 1 Gb/s-only slot will not recognise it.
How do I confirm the transceiver is operating at the rated 30 m distance after installation?
Check the switch port status for a 10 Gb/s link, verify the cable is Cat6a or better and under 30 m, and confirm no CRC errors appear in the interface counters.
Does the package include the Cat6a patch cable needed for the 30 m RJ-45 link?
The transceiver ships alone; a Cat6a or higher RJ-45 patch cable of the required length must be purchased separately.
More in SFP & SFP+ Transceiver Modules
Similar items
TRENDnet TEG-10GBS10 10GBASE-LR SFP+ transceiver 1310nm 10km
- 10GBase-LR
- Transceiver
HPE JD089B Gigabit Ethernet SFP Transceiver 1000Base-T RJ-45
- Transceiver
- HCRP, SPP
STARTECH GLCEXSMDST SFP transceiver 1000BASE-EX 40 km 1310 nm
- Transceiver
- IEEE 802.3z 1000BAS…
STARTECH MASFP10GBLR SFP+ transceiver 10GBASE-LR 10km 1310nm LC
- Transceiver
- IEEE 802.3ae 10 Gbi…





