Battery Technology Inc. ET-LAD60W-BTI projector lamp 330 Watt 2000 Hrs
- 330 W
- 2,000 Hrs.
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A ready-to-install 200 W lamp module rated for 2,000 hours of use in Barco OverView D1 projectors
The Barco OverView D1 lamp is a 200W replacement module designed for Barco projectors using the R9842020 part number. It ships as a fully assembled bulb and housing unit, ready for direct installation without separate component handling. This new lamp uses a Philips UHP bulb rated for 2000 hours of operation. It serves facilities needing a reliable light-source refresh for compatible overhead or rear-projection systems.
The lamp delivers a fixed 200W output with a rated lifespan of 2000 hours under typical operating conditions. Brightness and colour consistency will gradually decline as the bulb approaches this limit, requiring scheduled replacement to maintain image quality. The module is built to ISO9001 quality standards and undergoes checks for beam performance, ignition voltage, and run-time before shipping. No other wattage or life ratings apply to this specific assembly.
Installation consists of removing the old lamp housing and inserting the new module until it seats securely; no tools are required for the housing exchange. The most frequent issue is forgetting to reset the projector’s lamp-hour counter after fitting the new unit, which leaves the replacement timer inaccurate. Another common error is handling the bare bulb glass with bare fingers, which can create hot spots and shorten the 2000-hour rating. Always use the supplied gloves or a clean cloth when installing.
Measured against everything we stock in Replacement Projector Bulbs, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Barco |
| Product type | Projector Lamp |
| Display | |
| Lamp lifespan | 2,000 Hrs. |
| Power | |
| Power rating | 200 W |
The lamp fits the Barco R9842020 slot. Three OEM versions use genuine Philips, Osram or Ushio 200W bulbs; the compatible version uses OEM parts from a top third-party maker. All meet ISO 9001 checks.
It is the manufacturer-rated life of the 200W UHP bulb at standard brightness. Actual hours vary with operating mode, ambient temperature and how often the projector is power-cycled.
The module ships as a complete bulb-and-housing assembly keyed for the OverView D1 chassis, so it plugs directly into the projector's lamp socket without adapters.
More in Replacement Projector Bulbs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?