SAMA Q70-BKWAYNO3-G 360mm liquid cooler with 2.8" LCD display
- Intel&AMD
- AMD:AM5/AM4
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects 10mm ID by 16mm OD soft tubing using G1/4 threads in a white finish
These G1/4 threaded connectors join 10 mm inner-diameter by 16 mm outer-diameter soft tubing in a custom liquid-cooling loop. The white finish matches light-themed builds while the standard thread fits most water blocks, radiators, reservoirs and pumps. Each fitting seals with an internal O-ring and a knurled compression nut that tightens by hand. They are sold as individual extend connectors for repair or loop expansion.
The fittings suit anyone lengthening an existing run or replacing a worn connector in a 10×16 mm soft-tube system. They do not serve builders using hard tubing, smaller-bore soft tubing or push-fit connectors, and they cannot adapt to non-G1/4 ports without additional adapters. Buyers wanting coloured O-rings, angled elbows or rotary joints should look at other fitting styles.
Confirm every tube in the loop measures 10 mm ID and 16 mm OD so the compression rings seat correctly. Check that every component you will connect to exposes a female G1/4 port. Ensure you have enough fittings for each tube end — two per component — and plan for any angled or rotary adapters the routing requires.
Measured against everything we stock in Liquid Cooling & AIO Coolers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | Fittings |
| Product color | White |
| Size & build | |
| Fan size | No Fans |
They are sized for tubing with a 10 mm inner diameter and 16 mm outer diameter.
Yes, the G1/4 thread is the standard port size used by most water-cooling blocks and radiators.
Tighten the fitting by hand plus a quarter turn with a spanner, then run a leak test with paper towels under each joint.
More in Liquid Cooling & AIO Coolers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?