Barrow Mods LRC2.0 5-Way D-RGB Splitter Cable
Splits one D-RGB header into five ports for synchronous lighting across up to seven metres of strip (approx. 400 LEDs)
- Product colorBlack
- Key featuresThis splitter cable can be used to control 5 Barrow D-RGB st
- Control 5 D-RGB strips from one controller for simplified wiring
- Synchronise lighting across all strips for a unified look
- Support up to 7 metres of strips covering roughly 400 LEDs
- Black cable blends cleanly into dark-themed builds
- Single splitter reduces cable clutter inside the case
Five-Way Splitter for D-RGB Strips
This cable splits one D-RGB controller output into five ports for Barrow addressable strips. It targets builders who want synchronised lighting across multiple strips from a single header.
Maximum Load Is Seven Metres of Strip
The practical limit is 7 metres of D-RGB strip, approximately 400 LEDs in total. Exceeding this length can cause voltage drop, colour inconsistency or controller shutdown.
Black Cable With Standard D-RGB Connectors
The black sleeving blends into dark chassis interiors. Each port uses the common three-pin D-RGB keyed connector, so strips plug in without adapters and stay seated during transport.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 94% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Barrow |
| Model name | ARKZXS1-5 |
| Product color | Black |
Questions about this item
How many D-RGB strips can I connect to one splitter?
The cable provides five D-RGB outputs so you can run up to five Barrow strips from a single controller.
What does the 400 LED figure mean for my build?
It represents the maximum load of roughly 7 metres of strip that the splitter can drive without signal loss.
Which D-RGB standard does the 2.0 splitter use?
It follows the Barrow D-RGB pinout, letting all connected strips display synchronous lighting from one controller.
More in Internal PSU & Riser Cables
Similar items
STARTECH TX3SPLITTER 6.1 in TX3 Fan Power Splitter Cable
- 0.5 ft (0.15 m)
- Cable Connectors
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Micro Connectors 6-Pin PCIe to Dual 15-Pin SATA Power Cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





