We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

BFKK

BFKK 1.75mm 1Kg Silk PLA Orange Red Multicolor Fast Change Filament 3d printers accessory

SKU CH-V1TK-PCM3Y

Silk PLA filament shifts colour every 5-10 metres across four shiny hues, prints smoothly at 1.75 mm diameter on most FDM printers, and comes vacuum-sealed with a reusable zip bag

  • Fast colour shifts every 5‑10 metres for vibrant prints
  • 75 mm diameter feeds smoothly on most FDM printers
  • Silk‑like shiny finish adds pearly lustre to models
  • 1 kg spool vacuum‑sealed with desiccant stays dry
  • Includes reusable zip‑bag and 0.4 mm+ nozzle tip

Silk PLA filament for FDM printers

This 1.75 mm silk PLA spool weighs 1 kg and shifts colour every 5 to 10 metres across orange, red, purple and peacock blue tones. The rapid gradient suits makers who want vibrant, multi-colour prints from a single spool without pausing to swap filament. It feeds smoothly on most common FDM printers and 3D pens.

Check nozzle and temperature before use

The supplier advises a fresh 0.4 mm or larger nozzle and recommends printing at a higher temperature with lower speed than standard PLA. Verify that your hot-end can reach the required range and that your slicer profile can be adjusted accordingly. Ensure the printer’s extruder path is clear to avoid any feeding issues.

Vacuum-sealed spool with resealable bag

Each spool ships vacuum-packed with desiccant and includes a reusable zipper bag for storage between prints. The tangle-free winding means the filament end should be secured in the spool holes after every session. The silk finish leaves a smooth, pearly surface on finished models.

How it compares

Measured against everything we stock in 3D Printing Accessories & Materials, at today’s prices. Recalculated every night.

Price $41.99
Pricier than about 61% of the 590 comparable items (median $31.99).

New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

Does the 1.75 mm spool come with any tools or must I buy a nozzle separately?

The package includes one printer tool and the filament spool; a new 0.4 mm or larger nozzle is recommended for best results.

How quickly does the colour shift on this 1 kg silk PLA?

The filament changes colour randomly every 5 to 10 metres, cycling through silk orange, red, purple and peacock blue.

What print settings work well for this fast-change silk PLA on a typical FDM printer?

Use a higher nozzle temperature and slower speed than standard PLA; keep the spool dry in its vacuum bag with desiccant between prints.

More in 3D Printing Accessories & Materials

Similar items