BIQU Panda Jet Pack V2.0 Transparent Shell 3D Printer Accessory
- Panda Jet Pack V2 T…
- US7-1060000840
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Transparent PLA filament shifts colour every 5 to 10 metres across five clear hues, prints at 200 to 210 °C on most FDM printers with 1.75 mm diameter and 1 kg net weight
BFKK Clear Rainbow PLA is a 1.75 mm transparent multicolour filament designed for FDM 3D printers and 3D pens. Each spool contains 1 kg of material that shifts through clear yellow, red, blue, green and purple every 5 to 10 metres. The filament is vacuum-sealed with desiccant to stay dry and is produced on servo winders for tangle-free unwinding.
The 1.75 mm diameter fits the vast majority of FDM printers and pens without hardware changes. Servo-wound spools feed cleanly and the supplier notes no bubbling, jamming or warping during extrusion. A fresh 0.4 mm or larger nozzle is recommended for best surface quality, and the filament end should be secured in the spool holes after each print to prevent tangles.
One kilogram provides enough length for multiple medium-sized models while the rapid colour transitions create varied effects within a single print. The suggested nozzle temperature range is 200 °C to 210 °C. The material is described as more transparent than standard PLA but not optically clear like glass, so light transmission will be limited compared with dedicated clear filaments.
Measured against everything we stock in 3D Printing Accessories & Materials, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The filament changes colour roughly every 5 to 10 metres, cycling through clear yellow, red, blue, green and purple.
Print between 200 °C and 210 °C; the material melts cleanly and feeds without jamming at that range.
Any FDM printer or 3D pen that accepts 1.75 mm filament and a 0.4 mm or larger nozzle will work.
More in 3D Printing Accessories & Materials
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?